Professional Web Applications Themes

ATI Rage Mobility - FreeBSD

Hi. I'm trying to enable DRI on my IBM ThinkPad A20m, which has an ATI Rage Mobility P/M AGP 2x rev 100 GPU onboard. I succesfully installed the mach64 DRM module, which shows the following lines in my dmesg: drm0: <Rage Mobility P/M AGP 2X> port 0x2000-0x20ff mem 0xf4200000-0xf4200fff,0xf5000000-0xf5ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xf8000000 64MB info: [drm] Initialized mach64 1.0.0 20020904 on minor 0 However, when I start X.org 6.8.2, it doesn't show anything about DRM in the logfiles (attached). glxinfo reports it doesn't use Direct Rendering as well. Attached is my xorg.conf, ...

  1. #1

    Default ATI Rage Mobility

    Hi.

    I'm trying to enable DRI on my IBM ThinkPad A20m, which has an ATI
    Rage Mobility P/M AGP 2x rev 100 GPU onboard. I succesfully installed
    the mach64 DRM module, which shows the following lines in my dmesg:

    drm0: <Rage Mobility P/M AGP 2X> port 0x2000-0x20ff mem
    0xf4200000-0xf4200fff,0xf5000000-0xf5ffffff irq 11 at device 0.0 on
    pci1
    info: [drm] AGP at 0xf8000000 64MB
    info: [drm] Initialized mach64 1.0.0 20020904 on minor 0

    However, when I start X.org 6.8.2, it doesn't show anything about DRM
    in the logfiles (attached). glxinfo reports it doesn't use Direct
    Rendering as well.

    Attached is my xorg.conf, as well.

    My questions: 1) does anybody know if it is possible to have DRI on
    this configuration at all, and 2) how does one get it to work?

    Regards,
    Edwin Mons
    Edwin Guest

  2. #2

    Default Re: ATI Rage Mobility

    On Monday 28 March 2005 20:25, Edwin Mons wrote: [/ref]

    A frequent mistake is that people forget to install the DRI drivers. So,
    did you install "/usr/ports/graphics/dri"?
     

    xorg's log would be nice too.

    tijl
    Tijl Guest

  3. #3

    Default Fwd: ATI Rage Mobility

    On Tue, 29 Mar 2005 14:27:15 +0200, Tijl Coosemans <org> wrote: 

    It got scrubbed off, somehow... Anyways, try #2.

    --
    Cheers,
    Edwin Mons


    Edwin Guest

  4. #4

    Default Re: ATI Rage Mobility

    On Tue, 29 Mar 2005 14:27:15 +0200, Tijl Coosemans <org> wrote: 

    Try #3, this time as an URL to the logs: http://edwinm.ik.nu/Xorg.0.log

    Cheers,
    Edwin Mons
    Edwin Guest

  5. #5

    Default re: ATI RAGE Mobility

    On Monday 28 March 2005 20:25, Edwin Mons wrote: [/ref]




    from kernel LINT file
    # DRM options:
    # mgadrm: AGP Matrox G200, G400, G450, G550
    # tdfxdrm: 3dfx Voodoo 3/4/5 and Banshee
    # r128drm: ATI Rage 128
    # radeondrm: ATI Radeon up to 9000/9100
    # DRM_DEBUG: include debug printfs, very slow
    #
    # mga requires AGP in the kernel, and it is recommended
    # for AGP r128 and radeon cards.
    device mgadrm
    device "r128drm"
    device radeondrm
    device tdfxdrm
    options DRM_DEBUG

    You may need to add the
    "device mgadrm"
    Hope it helps.
    Mark Guest

  6. #6

    Default Re: ATI RAGE Mobility

    On Tue, 29 Mar 2005 14:28:19 -0800, Andrew Heyn <com> wrote: 

    I built it myself, but it ain't working...

    Edwinm
    Edwin Guest

  7. #7

    Default RE: ATI RAGE Mobility

    Sorry,

    Rage mobility is mach64... you're trying to use a rage128/radeon driver.
    That won't work. There is some preliminary mach64 support but you have
    to build it yourself. It really s, it's not so worth it.



    -----Original Message-----
    From: org
    [mailto:org]On Behalf Of Mark Busby
    Sent: Tuesday, March 29, 2005 11:23 AM
    To: org
    Subject: re: ATI RAGE Mobility


    On Monday 28 March 2005 20:25, Edwin Mons wrote: [/ref]
    my dmesg: [/ref]




    from kernel LINT file
    # DRM options:
    # mgadrm: AGP Matrox G200, G400, G450, G550
    # tdfxdrm: 3dfx Voodoo 3/4/5 and Banshee
    # r128drm: ATI Rage 128
    # radeondrm: ATI Radeon up to 9000/9100
    # DRM_DEBUG: include debug printfs, very slow
    #
    # mga requires AGP in the kernel, and it is recommended
    # for AGP r128 and radeon cards.
    device mgadrm
    device "r128drm"
    device radeondrm
    device tdfxdrm
    options DRM_DEBUG

    You may need to add the
    "device mgadrm"
    Hope it helps.

    Andrew Guest

  8. #8

    Default RE: ATI RAGE Mobility

    I would like to state that at one point, I did get this to work.
    This was also a long time ago, when the patches mentioned
    in some of the proceeding links had to be done.. (which were and probably
    still are XFree86 specific)

    http://people.freebsd.org/~anholt/dri/news.html
    http://am-productions.biz/docs/fujitsu-p2110.php leads to
    http://dri.freedesktop.org/wiki/Building

    I noticed that I had to make sure I rebuilt mach64.ko and some of the X
    libraries regarding dri
    if I was to upgrade the kernel.

    Note this from the Wiki:
    "The DRM is shipped with the kernel, so you shouldn't need to build it. If
    you choose to, simply run "make && make install" from the drm/bsd directory.
    "
    This is contrary to the suggestion to install "ports/graphics/drm." The
    building referred
    to above is within the X tree.

    The history to the mach64 dri support may be of interest:
    http://people.freebsd.org/~anholt/dri/news.html (already gave this link)

    You can always (if you are patient) contact anholt who is rather busy on
    freenode.net in
    #dri. Beware, I asked a question there, and fixed it myself before I got an
    answer.

    Hope this helps more than my other post.
    It still ed pretty bad once I got DRI working with my mach64, but...
    It was better...

    Thanks!
    Andrew


    -----Original Message-----
    From: org
    [mailto:org]On Behalf Of Mark Busby
    Sent: Tuesday, March 29, 2005 11:23 AM
    To: org
    Subject: re: ATI RAGE Mobility


    On Monday 28 March 2005 20:25, Edwin Mons wrote: [/ref]
    my dmesg: [/ref]




    from kernel LINT file
    # DRM options:
    # mgadrm: AGP Matrox G200, G400, G450, G550
    # tdfxdrm: 3dfx Voodoo 3/4/5 and Banshee
    # r128drm: ATI Rage 128
    # radeondrm: ATI Radeon up to 9000/9100
    # DRM_DEBUG: include debug printfs, very slow
    #
    # mga requires AGP in the kernel, and it is recommended
    # for AGP r128 and radeon cards.
    device mgadrm
    device "r128drm"
    device radeondrm
    device tdfxdrm
    options DRM_DEBUG

    You may need to add the
    "device mgadrm"
    Hope it helps.

    Andrew Guest

  9. #9

    Default Re: ATI RAGE Mobility [9700]

    Any way to get an ATI Mobility Radeon 9700 working with 3D acceleration ?


    Andrew Heyn wrote:
     [/ref]
    >my dmesg:
    >
    > [/ref]
    >
    >
    >
    >
    >from kernel LINT file
    ># DRM options:
    ># mgadrm: AGP Matrox G200, G400, G450, G550
    ># tdfxdrm: 3dfx Voodoo 3/4/5 and Banshee
    ># r128drm: ATI Rage 128
    ># radeondrm: ATI Radeon up to 9000/9100
    ># DRM_DEBUG: include debug printfs, very slow
    >#
    ># mga requires AGP in the kernel, and it is recommended
    ># for AGP r128 and radeon cards.
    >device mgadrm
    >device "r128drm"
    >device radeondrm
    >device tdfxdrm
    >options DRM_DEBUG
    >
    >You may need to add the
    >"device mgadrm"
    >Hope it helps.
    >_______________________________________________
    >org mailing list
    >http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    >To unsubscribe, send any mail to "org"
    >
    >_______________________________________________
    >org mailing list
    >http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    >To unsubscribe, send any mail to "org"
    >
    >
    >[/ref]

    - Guest

  10. #10

    Default Re: ATI RAGE Mobility [9700]

    On Sun, Apr 03, 2005 at 04:08:34AM +0100, - wrote: 

    No. Ati only supplies windows and Linux drivers. The open source drivers
    in xorg only support up to the Radeon 9250.

    But see
    http://lists.freebsd.org/pipermail/freebsd-current/2004-January/017723.html

    Roland
    --
    R.F. Smith /"\ ASCII Ribbon Campaign
    r s m i t h x s 4 a l l . n l \ / No HTML/RTF in e-mail
    http://www.xs4all.nl/~rsmith/ X No Word docs in e-mail
    public key: http://www.keyserver.net / \ Respect for open standards

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.0 (FreeBSD)

    iD8DBQFCT6zDEnfvsMMhpyURAs6BAKCwXn9yP6eXluBCo0bzOe hvMcyaPwCfUI97
    pKBf/LRsZ/w2whgiSXp+oDY=
    =Rag2
    -----END PGP SIGNATURE-----

    Roland Guest

Similar Threads

  1. Install note for the ATI Mobility M3/M4
    By Benjamin-Hugo LeBlanc in forum Linux Setup, Configuration & Administration
    Replies: 0
    Last Post: August 23rd, 02:19 AM
  2. frame buffer for ati rage mobility ker 2.6.0-test1
    By Micha Feigin in forum Debian
    Replies: 0
    Last Post: July 23rd, 02:40 PM
  3. PB G4: ATI Mobility Radeon 9000 - 32 or 64 MB
    By Wojciech Orlinski in forum Mac Portable
    Replies: 0
    Last Post: July 4th, 02:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139