Ask a Question related to AIX, Design and Development.
-
Martin Stenzel #1
Boot problems on 595
Hi there,
system is AIX 4.3.3 ML 10 on a 595 deskside server.
After the last shutdown after installing OpenAFS I saw the flashing 888.
I did not change anything on the hardware side. After resetting the
machine I got the c32 code.
Then I attached a null modem cable to S1 (wiring should be fine,
normally goes to my UPS) and fired up kermit in connect mode on my other
machine. This got me up to the 42c code ... blank ... nothing. On the
Linux side ... no sign of life.
What am I about to do from here?
How can it be that there is no decent way to talk to my server? ($40.000
5 yrs. ago was probably not good enough for IBM).
Kinda upset, regards Martin.
--
mstenzel at pankow dot in hyphen berlin dot de
Martin Stenzel Guest
-
Removable drive and RH9 boot problems
Hi I have just installed RH9 and GRUB on hda with partitions as follows hda1 = /boot hda2 = / hda5 = /home This will boot and run fine until I... -
linux boot CD creation problems
Hi all, I have a dual boot machine (XP + RH 7.3). I have not installed any boot loaders and get into linux thru a boot floppy. (My boot sequence... -
XP Boot up problems
Hi, Hope someone can help me as this one is a bit strange. I have access to a XP Pro machine (build 2600) that was shut down correctly last... -
Boot disk problems
Hi I have a freind who is running redhat 7.3 and she never istalled LILO or GRUB, for some reason she always got into Linux via a boot disk.... -
dual boot problems: LILO stops at LI
On Wed, 25 Jun 2003 08:28:44 -0600, Brian Myers wrote: The boot loader can be either on the MBR or on a partition BIOS parameter block,"BPB." ...
Reply With QuoteSimilar Questions and Discussions
Posting Permissions
- You may not post new threads
- You may post replies
- You may not post attachments
- You may not edit your posts
