Ask a Question related to Linux / Unix Administration, Design and Development.
-
FreeDiver #1
Can Emulex LP9802 HBA driver (5.01e) supports Clariions FC4700 & Hitachi 9980 ??
Could driver "5.01e" for Emulex LP9802-PCI HBAs
support the following direct-attached storage arrays in the
same host (i.e., Solaris 8, Fujitsu PrimePower 850) :
- EMC Clariions FC4700
- Hitachi 9980
If not, please advise me if there's any driver out there
that support both.
Thanks,
Bill
FreeDiver Guest
-
lsparent: 0514-520 Cannot find information ... after Installation of Emulex' LP8000 driver
Hi Experts, HW: 44p Model 170 OSlevel: 4330-10 We removed IBM's FC-Adapter and added an Emulex LP8000. According to the instructions from... -
AIX 5.1 ML03 and Emulex LP9002 and FAStT500
Hello all, I trying to configure a SAN between a p610 server and a Fastt500 through a 2109 S16 switch (brocade) With 6228 adapters works fine.... -
Disabling mpxio on a per (Hitachi) LUN basis...
Hi: I know how to disable mpxio on a per-HBA basis by editing the /kernel/drv/qlc.conf and adding an entry such as the following: name="qlc"... -
Issue with Freedom Hitachi
Hi, We are currently using a SAN with Hitachi storage. Each LUN is reachable by two servers (p630 AIX5.1 ML4). We create one vg on each lun. ... -
Hitachi shadowimage on Aix
Hi, We are testing Hitachi truecopy and shadowimage on our AIX 4.3.3 server. I have setup the pairs (testvg) on the same server and HSD using...
Reply With QuoteSimilar Questions and Discussions
Posting Permissions
- You may not post new threads
- You may post replies
- You may not post attachments
- You may not edit your posts
