Professional Web Applications Themes

cmpq dl380 server. ipmi bmc question - FreeBSD

Hello guys and gals, Does system fan control on a Compaq DL380 ,first edition, have any support? Sounds like a jet at idle in the machine room. I have looked through the acpi and port recomendations I have come across via google and I'm not having any luck at all. I believe it is supported in Linux but I don't know how. I can't say I'm any hardware wizard on this kind of thing. Update: I installed freeipmi and ipmitool and I'm not having any luck with these apps. The cli commands are apparently over my head because I haven't ...

  1. #1

    Default cmpq dl380 server. ipmi bmc question


    Hello guys and gals,



    Does system fan control on a Compaq DL380 ,first edition, have any support?
    Sounds like a jet at idle in the machine room.

    I have looked through the acpi and port recomendations I have come
    across via google and I'm not having any luck at all. I believe it is supported in Linux
    but I don't know how. I can't say I'm any hardware wizard on this kind of thing.

    Update: I installed freeipmi and ipmitool and I'm not having any luck with these apps.
    The cli commands are apparently over my head because I haven't been able to get it to work and now my head hurts.
    Am I barking up the right tree or just peeing on it?
    HP was not terribly helpful. All the recent ROMpaks have been installed.
    Thanks,
    Aaron

    %sysctl hw.acpi

    hw.acpi.supported_sleep_state: S4 S5

    hw.acpi.power_button_state: S5

    hw.acpi.sleep_button_state: S4

    hw.acpi.lid_switch_state: NONE

    hw.acpi.standby_state: S1

    hw.acpi.suspend_state: S3

    hw.acpi.sleep_delay: 1

    hw.acpi.s4bios: 0

    hw.acpi.verbose: 0

    hw.acpi.reset_video: 1

    hw.acpi.cpu.cx_supported: C1/0

    hw.acpi.cpu.cx_lowest: C1

    hw.acpi.cpu.cx_usage: 100.00%

    hw.acpi.thermal.min_runtime: 0

    hw.acpi.thermal.polling_rate: 10

    hw.acpi.thermal.tz0.temperature: 8.3C

    hw.acpi.thermal.tz0.active: -1

    hw.acpi.thermal.tz0.thermal_flags: 0

    hw.acpi.thermal.tz0._PSV: 9.8C

    hw.acpi.thermal.tz0._HOT: -1

    hw.acpi.thermal.tz0._CRT: 31.3C

    hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1



    GENERIC kernel

    Is acpi0 <compaq racebait> what I should be looking for or

    is there another system controlling the system/case fan?





    CPU: Intel Pentium III (996.85-MHz 686-class CPU)

    Origin = "GenuineIntel" Id = 0x686 Stepping = 6



    Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE, CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR, SSE>

    real memory = 536854528 (511 MB)

    avail memory = 515682304 (491 MB)

    ACPI APIC Table: <COMPAQ 00000083>

    ioapic0: Changing APIC ID to 8

    MADT: Forcing active-low polarity and level trigger for SCI

    ioapic0 <Version 1.1> irqs 0-34 on motherboard

    npx0: <math processor> on motherboard

    npx0: INT 16 interface

    acpi0: <COMPAQ RACEBAIT> on motherboard

    acpi0: Power Button (fixed)

    Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000

    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0

    cpu0: <ACPI CPU> on acpi0

    pcib0: <ACPI Host-PCI bridge> on acpi0

    pci0: <ACPI PCI bus> on pcib0

    ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem
    0xc5000000-0xc5ffffff,0xc6000000-0xc6ffffff irq 19 at device 1.0 on pci0

    ida0: drives=1 firm_rev=1.50

    idad0: <Compaq Logical Drive> on ida0

    idad0: 26017MB (53284800 sectors), blocksize=512

    fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2400-0x243f mem
    0xc4e00000-0xc4efffff,0xc4fff000-0xc4ffffff irq 17 at device 2.0 on pci0

    miibus0: <MII bus> on fxp0

    inphy0: <i82555 10/100 media interface> on miibus0

    inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

    fxp0: Ethernet address: 00:02:a5:64:e6:95

    pci0: <display, VGA> at device 3.0 (no driver attached)

    pci0: <base peripheral> at device 4.0 (no driver attached)

    isab0: <PCI-ISA bridge> at device 15.0 on pci0

    isa0: <ISA bus> on isab0

    atapci0: <ServerWorks ROSB4 UDMA33 controller> port
    0x2c00-0x2c0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0

    ata0: channel #0 on atapci0

    ata1: channel #1 on atapci0

    pcib1: <ACPI Host-PCI bridge> on acpi0

    pci3: <ACPI PCI bus> on pcib1

    acpi_tz0: <Thermal Zone> on acpi0

    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0

    atkbd0: <AT Keyboard> irq 1 on atkbdc0

    kbd0 at atkbd0

    psm0: <PS/2 Mouse> irq 12 on atkbdc0

    psm0: model MouseMan+, device ID 0

    ppc0: <Standard parallel printer port> port 0x778-0x77d,0x378-0x37f irq
    7 drq 0 on acpi0

    ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode

    ppbus0: <Parallel port bus> on ppc0

    plip0: <PLIP network interface> on ppbus0

    lpt0: <Printer> on ppbus0

    lpt0: Interrupt-driven port

    ppi0: <Parallel I/O> on ppbus0

    fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0

    fd0: <1440-KB 3.5" drive> on fdc0 drive 0

    sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0

    sio0: type 16550A

    sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on acpi0

    sio1: type 16550A

    orm0: <ISA Option ROMs> at iomem
    0xee000-0xeffff,0xe8000-0xedfff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0

    pmtimer0 on isa0

    sc0: <System console> at flags 0x100 on isa0

    sc0: VGA <16 virtual consoles, flags=0x300>

    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

    Timecounter "TSC" frequency 996849075 Hz quality 800

    Timecounters tick every 10.000 msec

    acd0: CDROM <COMPAQ CD-ROM SN-124Q/QA17> at ata0-master PIO4

    Mounting root from ufs:/dev/idad0s2a





    Thanks,

    Aaron

    Aaron Guest

  2. #2

    Default Re: cmpq dl380 server. ipmi bmc question





    ----- Original Message -----
    From: "Aaron Sloan" <org>
    To: <org>
    Sent: Friday, April 08, 2005 11:16 AM
    Subject: cmpq dl380 server. ipmi bmc question

     
    support? 
    supported in Linux 
    thing. 
    with these apps. 
    to get it to work and now my head hurts. 

    Aaron, are you sure that you're supposed to be able to adjust the fan speed
    on the 380 from within the OS? The reason that I ask, is that the 330's and
    350's have a temp sensor that isn't detected until during post, so there's a
    few seconds on them that the fans run full on. I'm just curious because if
    the 380's are set up the same, you may have a faulty sensor.

    --

    Micheal Patterson
    Senior Communications Systems Engineer
    405-917-0600

    Confidentiality Notice: This e-mail message, including any attachments,
    is for the sole use of the intended recipient(s) and may contain
    confidential and privileged information. Any unauthorized review, use,
    disclosure or distribution is prohibited. If you are not the intended
    recipient, please contact the sender by reply e-mail and destroy all
    copies of the original message.

    Micheal Guest

  3. #3

    Default Re: cmpq dl380 server. ipmi bmc question

    On Fri, Apr 08, 2005 at 02:00:27PM -0500, Micheal Patterson wrote: [/ref]
    My DL380 is loud too. But, if it makes you feel any better, you should
    hear my DL580, it's deafening.
     
    That's the real question
     
    My DL380 is very loud too.

    --
    Regards,
    Doug
    Doug Guest

  4. #4

    Default Re: cmpq dl380 server. ipmi bmc question


    Doug Poland wrote:

    On Fri, Apr 08, 2005 at 02:00:27PM -0500, Micheal Patterson wrote:


    From: "Aaron Sloan" [1]<org> To: [2]<org>



    Hello guys and gals,



    Does system fan control on a Compaq DL380 ,first edition, have any
    support? Sounds like a jet at idle in the machine room.



    My DL380 is loud too. But, if it makes you feel any better, you should
    hear my DL580, it's deafening.



    Aaron, are you sure that you're supposed to be able to adjust the fan speed
    on the 380 from within the OS?



    That's the real question



    The reason that I ask, is that the 330's and 350's have a temp sensor
    that isn't detected until during post, so there's a few seconds on
    them that the fans run full on. I'm just curious because if the 380's
    are set up the same, you may have a faulty sensor.



    My DL380 is very loud too.



    There are no support to fan control on first generation of DL/ML
    Compaq Servers.
    The control is made by software (M$, Linux and others supported SO)
    wich control the fan speed.
    On linux it is implemented as a kernel module and a daemon (no source
    available for both) so i can't solve this.
    Luiz
    I got an anwer from someone in the know. I think I'm just going to
    find a different solution to the problem.
    HP isn't excited about releasing the source code so I think I'll just
    idle the fan with my own hardware based control.
    Thermostat and a relay. I haven't looked over the wiring of the fan
    in detail yet but it isn't just 2 or 3 wires.
    Maybe I should steal the guts out of a 330 or 350? : )
    Thanks,
    Aaron

    References

    1. mailto:org
    2. mailto:org
    Aaron Guest

Similar Threads

  1. Web Server Question
    By Westboarder in forum Coldfusion Server Administration
    Replies: 0
    Last Post: October 19th, 10:53 PM
  2. IPMI doesn't work...
    By Jeff in forum FreeBSD
    Replies: 2
    Last Post: March 15th, 12:20 AM
  3. Question: W2K - ok to use as web server?
    By VB Programmer in forum ASP.NET General
    Replies: 13
    Last Post: July 23rd, 05:39 PM
  4. Question about Mac OSX Server
    By Hercules Rockefeller in forum Mac Applications & Software
    Replies: 9
    Last Post: June 30th, 11:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139