Ask a Question related to Windows Setup, Administration & Security, Design and Development.
-
Gerry #1
Files I need to get back...
No promises here, but hold down the F8 key before system
has time to start booting and choose to boot into safe
mode. It will then give you the option to log in as
Administrator or your accout name. Choose to log in as
administrator. See if logging in as administrator will
give you access to files. I'm not sure if it will work,
but it's worth a shot. Good luck.
bad>-----Original Message-----
>Hello,
>
>I had a Windows XP installation go corrupt on me (try to
>boot to Windows and I get a quick blue screen before it
>reboots). After messing with it for a while I decided to
>just do a clean install on a new drive and use my
>existing drive for backup purposes.
>
>Well after the clean install I set the drive with the>installation to slave and access it to get my files from
>it. I can access it fine except that when I try to get
>into my users folder it gives me an access denied error.
>I believe it's because I marked the check box in Windows
>that says make your files private from other users.
>
>Well my question is...does anyone know of a way to get
>into that folder to get my stuff without fixing the
>corrupt XP installation?
>
>Thank you for your time and help,
>
>CB3
>.
>Gerry Guest
-
Back Up Files When Changed
Is there a way to back up files through Contribute when you have made a change on the page(s)? I want to be able to back them up on a desktop... -
Problem back converting files from CS
We have an issue with CS not being able to save files in earlier Ill formats, specifically version 5.5. CS does not appear offer anything between v3... -
Saving CS files back to version 10 or ealier
Does anyone know if it is possible to save files out of Illustrator CS as a previous version? Whenever we try to import a CS file into 10, it either... -
Recovered files going back online
I've seen posted here everyone fears about putting a recovered files back online. Evidently, the recover does not always make a good file. So, the... -
What files to back up cause hard drive is going bad. Please help.
mike wrote: Why not just tar /etc and /home (or wherever the users live)? -- Timothy Murphy e-mail: tim@birdsnest.maths.tcd.ie tel:... -
Conrad #2
Files I need to get back...
Thanks for the Gerry, unfortunately it didn't work I
still get the access denied message.
Does anyone know of any software that may get me around
the access restrictions set on that folder?
I do appreciate all the help...
-CB3
Conrad Guest
-
Jupiter Jones [MVP] #3
Re: Files I need to get back...
Conrad;
Take Ownership to get the files back:
[url]http://support.microsoft.com/?kbid=308421[/url]
--
Jupiter Jones [MVP]
An easier way to read newsgroup messages:
[url]http://www.microsoft.com/windowsxp/pro/using/newsgroups/setup.asp[/url]
Please respond to newsgroup only for everyone's benefit.
"Conrad" <cadmastercr@hotmail.com> wrote in message
news:051b01c34e55$1d924de0$a001280a@phx.gbl...> Hello,
>
> I had a Windows XP installation go corrupt on me (try to
> boot to Windows and I get a quick blue screen before it
> reboots). After messing with it for a while I decided to
> just do a clean install on a new drive and use my
> existing drive for backup purposes.
>
> Well after the clean install I set the drive with the bad
> installation to slave and access it to get my files from
> it. I can access it fine except that when I try to get
> into my users folder it gives me an access denied error.
> I believe it's because I marked the check box in Windows
> that says make your files private from other users.
>
> Well my question is...does anyone know of a way to get
> into that folder to get my stuff without fixing the
> corrupt XP installation?
>
> Thank you for your time and help,
>
> CB3
Jupiter Jones [MVP] Guest
-
Jason Horsnell #4
Perfect!!!
I've just had exactly that problem today!
Solved, perfect timing.
Thank very much guys....
8-))
J.
Jason Horsnell Guest



Reply With Quote

