Professional Web Applications Themes

Fun installing Debian in a Sun IPX - Linux Setup, Configuration & Administration

I have here a Sparc IPX I am trying to install Debian linux on it. The installation proceeds (seemgly) correct until the time to make the HD bootable. It does not seem to be able to do that: "SILO wasn't able to install. You'll still be able to boot your system if you create a boot floppy, but it won't be able to boot without a floppy." So, I ask in the debian sparc mailing list for suggestions and am told to go to the shell while running the installation and do the following: cd /target mv etc/silo.conf boot/ ln ...

  1. #1

    Default Fun installing Debian in a Sun IPX

    I have here a Sparc IPX I am trying to install Debian linux on it. The
    installation proceeds (seemgly) correct until the time to make the HD
    bootable.
    It does not seem to be able to do that:

    "SILO wasn't able to install. You'll still be able to boot your system
    if you
    create a boot floppy, but it won't be able to boot without a floppy."

    So, I ask in the debian sparc mailing list for suggestions and am told to
    go to the shell while running the installation and do the following:

    cd /target
    mv etc/silo.conf boot/
    ln -s . boot/etc
    ln -s . boot/boot
    ln -s ../boot/silo.conf etc/silo.conf
    cd /
    silo -r /target -f

    After doing that, I decided to check how things look in my 4.5GB HD:

    # df
    Filesystem 1k-blocks Used Available Use% Mounted on
    /dev/ram0 3524 3151 373 89% /
    /dev/sda1 3974908 76032 3696960 2% /target
    /dev/sda4 125779 30874 88411 26% /target/var
    # cd target
    # ls
    bin etc lib proc usr
    boot floppy lost+found root var
    cdrom home mnt sbin vmlinuz
    dev initrd opt tmp
    # ls -l boot
    -rw-r--r-- 1 root root 321829 Dec 1 19:08
    System.map-2.2.20-sun4cd
    m
    lrwxrwxrwx 1 root root 1 Dec 1 19:39 boot -> .
    -rw-r--r-- 1 root root 1024 Aug 15 2002 cd.b
    -rw-r--r-- 1 root root 2982 Dec 1 19:08
    config-2.2.20-sun4cdm
    lrwxrwxrwx 1 root root 1 Dec 1 19:39 etc -> .
    -rw-r--r-- 1 root root 1024 Aug 15 2002 fd.b
    -rw-r--r-- 1 root root 512 Aug 15 2002 first.b
    -rw-r--r-- 1 root root 1024 Aug 15 2002 generic.b
    -rw-r--r-- 1 root root 784 Aug 15 2002 ieee32.b
    -rw-r--r-- 1 root root 7680 Dec 1 19:35 old.b
    -rw-r--r-- 1 root root 59904 Dec 1 19:43 second.b
    -rw-r--r-- 1 root root 2350 Aug 15 2002 silo.conf
    -rw-r--r-- 1 root root 57512 Aug 15 2002 silotftp.b
    -rw-r--r-- 1 root root 512 Aug 15 2002 ultra.b
    -rw-r--r-- 1 root root 890942 Dec 1 19:08
    vmlinuz-2.2.20-sun4cdm
    #

    /vmlinuz (or, currently, /target/vmlinuz) is defined as:

    lrwxrwxrwx 1 root root 27 Dec 1 19:08
    vmlinuz -> boot/vmlinuz-2.2.20-sun4cdm

    /etc/silo.conf is defined as

    # ls -l etc
    -rw-r--r-- 1 root root 2091 Dec 1 19:33 adduser.conf
    -rw-r--r-- 1 root root 44 Dec 1 19:25 adjtime
    [...]
    lrwxrwxrwx 1 root root 17 Dec 1 19:40 silo.conf ->
    .../boot/silo.conf
    #

    Why is Silo complaining it cannot find /etc/silo.conf?

    Boot device: /sbus/esp0,800000/sd3,0 File and args:
    SILO Buggy old PROMs don't allow reading past 1GB from start of the disk.
    Send complains to SMCC

    Read error on block 360452 (tried 4096, got -1)

    Cannot find /etc/silo.conf (Unknown ext2 error)

    Couldn't load /etc/silo.conf
    No config file loaded, you can boot just from this command line
    Type [prompath;]part/path_to_image [parameters] on the prompt
    E.g. /iommu/sbus/espdma/esp/sd3,0;4/vmlinux root=/dev/sda4
    or 2/vmlinux.live (to load vmlinux.live from 2nd partition of boot disk)
    boot:

    --
    Mauricio raub-kudria-com
    (if you need to email me, use this address =)
    Mauricio Guest

  2. #2

    Default Re: Fun installing Debian in a Sun IPX

    In <teranews.com> Mauricio <gov> writes:

    [X-posting killed, del] 
     

    Well, it's telling you what the problem is. Your boot partition should
    be below the first 1G of the disk, else silo would not be able to read
    all data it's needing,

    HTH,
    Uli
    --
    Dipl. Inf. Ulrich Teichert|e-mail: de
    Stormweg 24 |listening to: Noticable One (Rotten Apples)
    24539 Neumuenster, Germany|Obstacle 1 (Interpol) Paranoia (N.Y. Rel-X)
    Ulrich.Teichert@gmx.de Guest

  3. #3

    Default Re: Fun installing Debian in a Sun IPX

    If you have provided the same information to the Debian Sparc mailing
    list, you would have gotten your answer. You did not provide your
    partition layout to the Sparc mailing list.

    Anyway, the root of your problem is your "/" partition too big.
    That is what SILO is trying to tell you. This is very similar to
    the 1024 cylinder in the i386 world. You have 2 options. You need
    to make your "/" partition lesser than 1G and it has to be at the
    beginning of the disk. Or you can make a small partition "/boot"
    at the beginning of your disk.

    Once you have done either one of the above. You'll be fine.

    Mauricio (gov) wrote:
    : I have here a Sparc IPX I am trying to install Debian linux on it. The
    : installation proceeds (seemgly) correct until the time to make the HD
    : bootable.
    : It does not seem to be able to do that:

    : "SILO wasn't able to install. You'll still be able to boot your system
    : if you
    : create a boot floppy, but it won't be able to boot without a floppy."

    : So, I ask in the debian sparc mailing list for suggestions and am told to
    : go to the shell while running the installation and do the following:

    : cd /target
    : mv etc/silo.conf boot/
    : ln -s . boot/etc
    : ln -s . boot/boot
    : ln -s ../boot/silo.conf etc/silo.conf
    : cd /
    : silo -r /target -f

    : After doing that, I decided to check how things look in my 4.5GB HD:

    : # df
    : Filesystem 1k-blocks Used Available Use% Mounted on
    : /dev/ram0 3524 3151 373 89% /
    : /dev/sda1 3974908 76032 3696960 2% /target
    : /dev/sda4 125779 30874 88411 26% /target/var

    [snip]

    : Why is Silo complaining it cannot find /etc/silo.conf?

    : Boot device: /sbus/esp0,800000/sd3,0 File and args:
    : SILO Buggy old PROMs don't allow reading past 1GB from start of the disk.
    : Send complains to SMCC

    : Read error on block 360452 (tried 4096, got -1)

    : Cannot find /etc/silo.conf (Unknown ext2 error)

    : Couldn't load /etc/silo.conf
    : No config file loaded, you can boot just from this command line
    : Type [prompath;]part/path_to_image [parameters] on the prompt
    : E.g. /iommu/sbus/espdma/esp/sd3,0;4/vmlinux root=/dev/sda4
    : or 2/vmlinux.live (to load vmlinux.live from 2nd partition of boot disk)
    : boot:

    : --
    : Mauricio raub-kudria-com
    Alex Guest

Similar Threads

  1. Installing NVIDIA drivers on Debian
    By vir in forum Linux Setup, Configuration & Administration
    Replies: 4
    Last Post: September 8th, 06:33 PM
  2. Replies: 3
    Last Post: August 3rd, 01:10 AM
  3. Replies: 3
    Last Post: August 1st, 07:30 PM
  4. installing Debian 3.0R1
    By davydp in forum Debian
    Replies: 1
    Last Post: July 17th, 04:20 AM
  5. Problems installing debian 3.0
    By Jonathan M. Katz in forum Linux Setup, Configuration & Administration
    Replies: 0
    Last Post: July 4th, 08:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139