HELP please

[Asif Rehman]

Hello

I created a database for invoicing purposes and have 4
tables of many (Products, Customers, Orders, Order
Details) linked to create a form called orders for
invoicing.
In the products table I have a unit price field which
displays the price of an item when selected in the orders
subform which is a datasheet. I would like to have 3
mulitple price bands so depending on where the customer is
located is how much they will have to pay for the
product.

I have created a price band field in the customers table
and three other unit prices in the products table. How do
I get the subform to look at which price band the customer
falls into when they are selected and then display the
price of the product when it is selected in the subform
datasheet.

Any help will be much appreciated.

Kindest Regards

Asif
..

[CTAPIX]

hi, any know ,how reset a autonumeric range , in the
database.

the database is ready in SQLSERVER 7


anything send answer, me to [email]carlostapi@vtr.net[/email] please

[ctapix LASTES]

thank,

how make a BOL in DBCC??

you can more explicit please, i am newbee in SQLSERVER ;(

you know if will how make this ,(reset autnumeric ) from A ASP page???


*** Sent via Developersdex [url]http://www.developersdex.com[/url] ***
Don't just participate in USENET...get rewarded for it!

[Bob Castleman]

BOL = Books Online - Micrsofts documentation that comes with SQL Server.

Cheers!

Bob Castleman
SuccessWare Software

"ctapix LASTES" <carlostapi@vtr.net> wrote in message
news:O%23YmodZQDHA.2224@TK2MSFTNGP12.phx.gbl...

>
> thank,
>
> how make a BOL in DBCC??
>
> you can more explicit please, i am newbee in SQLSERVER ;(
>
> you know if will how make this ,(reset autnumeric ) from A ASP page???
>
>
> *** Sent via Developersdex [url]http://www.developersdex.com[/url] ***
> Don't just participate in USENET...get rewarded for it!

[ctapix LASTES]

please where i can see the BOL, i went to mocrosoft.com and in search
I, put the BOL ,and no matching

good ,

anyyyyyyy can help me

only i need how reset autonumeric camp in SQLSERVER7


*** Sent via Developersdex [url]http://www.developersdex.com[/url] ***
Don't just participate in USENET...get rewarded for it!

[Bob Castleman]

BOL is an option during installation of SQL Server. I believe it included by
default and has to be unselected by default. I am assuming you have
installed all of the Client Tools on your work station. If not, you will
need to do that.

Also, updates to BOL are available from MS

Bob

"ctapix LASTES" <carlostapi@vtr.net> wrote in message
news:OBC$IlaQDHA.3236@TK2MSFTNGP10.phx.gbl...

>
> please where i can see the BOL, i went to mocrosoft.com and in search
> I, put the BOL ,and no matching
>
> good ,
>
> anyyyyyyy can help me
>
> only i need how reset autonumeric camp in SQLSERVER7
>
>
> *** Sent via Developersdex [url]http://www.developersdex.com[/url] ***
> Don't just participate in USENET...get rewarded for it!

[Anith Sen]

If you have SQL Server/client tools installed on your machine, you can see
it on your Start->Programs->SQL Server group. You can also download a copy &
install it on your machine from:
[url]http://www.microsoft.com/sql/techinfo/productdoc/2000/default.asp[/url]

--
- Anith
( Please reply to newsgroups only )

[Richard Lentini]

I recently published a site with Dreamweaver MX and everything was working
fine until today. Now I cannot "put" or "get" files with Dreamweaver. My
computer locks up whenever I try to transfer a file. I have all the correct
addressing but it locks up consistently. I am using win 2000. It locks up
immediately after saying "connected to remote site". I can transfer files to
the host using another program such as the ws_ftp program. I cannot think
of anything I did to cause this problem. I loaded Dreamweaver onto two
other machines and I get the exact same results. What is going on? Does
anybody know? The Host site people are not much help. Thanks.

Richard

[Paul Taylor]

On Fri, 11 Jul 2003 01:32:18 GMT, "Richard Lentini"
<richlen@adelphia.net> wrote:

>I recently published a site with Dreamweaver MX and everything was working
>fine until today. Now I cannot "put" or "get" files with Dreamweaver. My
>computer locks up whenever I try to transfer a file. I have all the correct
>addressing but it locks up consistently. I am using win 2000. It locks up
>immediately after saying "connected to remote site". I can transfer files to
>the host using another program such as the ws_ftp program. I cannot think
>of anything I did to cause this problem. I loaded Dreamweaver onto two
>other machines and I get the exact same results. What is going on? Does
>anybody know? The Host site people are not much help. Thanks.
>
>Richard
>

I get a similar problem, but don't wory about it. It's down to
firewall issues, but, in truth, the FTP facilities in Dreamweaver are
not the best. I recommend you stick to WS-FTP. Have you seen version 8
of WS_FTP? It's got full synchronize facilities and you can view all
the images etc. Dreamweaver is the best tool for design, but not for
uploading.


Paul Taylor
[url]http://www.technocurve.co.uk[/url]

[Mike Brown]

Fester wrote:

>
> I'm running SCO 5.0.5 on a Dell Poweredge 4600 with 4 drives. Two
> containers, two drives per container. Using the Dell Percraid 3DC. I'm
> running the "amird" drivers which seem to work well except when i want to
> add the second container i can see no way to do this.
>
> Yes i've tried every combination of mkdev hd i can think of and sconf -v
> doesn't show anything more than i can see already.
>
> Has anyone else mananged to get this working???
>
> I'm pulling out what's left my hair here:(
>
> Cheers.
>
> Patrick

I have not worked with the 3DC, but I remember some of the older raid
controllers based on the AMI board set the second volume ( container )
as LUN1, where the first unit was LUN0. So it was

amird controller 0 bus 0 id 0 lun 0
amird controller 0 bus 0 id 0 lun 1

Mike

--
Michael Brown

The Kingsway Group

[Fester]

"Mike Brown" <mike@tkg.ca> wrote in message news:3F0ECAA3.4069C2FA@tkg.ca...

> Fester wrote:

> >
> > I'm running SCO 5.0.5 on a Dell Poweredge 4600 with 4 drives. Two
> > containers, two drives per container. Using the Dell Percraid 3DC. I'm
> > running the "amird" drivers which seem to work well except when i want

to

> > add the second container i can see no way to do this.
> >
> > Yes i've tried every combination of mkdev hd i can think of and sconf -v
> > doesn't show anything more than i can see already.
> >
> > Has anyone else mananged to get this working???
> >
> > I'm pulling out what's left my hair here:(
> >
> > Cheers.
> >
> > Patrick

>
> I have not worked with the 3DC, but I remember some of the older raid
> controllers based on the AMI board set the second volume ( container )
> as LUN1, where the first unit was LUN0. So it was
>
> amird controller 0 bus 0 id 0 lun 0
> amird controller 0 bus 0 id 0 lun 1
>
> Mike
>
> --
> Michael Brown
>
> The Kingsway Group

Yep i'd read that too ... but it still seems to have issues picking the
second container up. I installed 2k server this morning to check it wasn't
something i'd forgotten to do with the drives and that worked. I've also
tried the controller card in H20 mode and mass storage mode.

Any other suggestions gratefully recieved at this point in time ;)

Cheers.

Patrick.

[Fester]

"Fester" <fester@nospamtagmx.co.uk> wrote in message
news:bemk3u$hb0$1@newsreaderm1.core.theplanet.net. ..

>
> "Mike Brown" <mike@tkg.ca> wrote in message

news:3F0ECAA3.4069C2FA@tkg.ca...

> > Fester wrote:

> > >
> > > I'm running SCO 5.0.5 on a Dell Poweredge 4600 with 4 drives. Two
> > > containers, two drives per container. Using the Dell Percraid 3DC. I'm
> > > running the "amird" drivers which seem to work well except when i want

> to

> > > add the second container i can see no way to do this.
> > >
> > > Yes i've tried every combination of mkdev hd i can think of and

sconf -v

> > > doesn't show anything more than i can see already.
> > >
> > > Has anyone else mananged to get this working???
> > >
> > > I'm pulling out what's left my hair here:(
> > >
> > > Cheers.
> > >
> > > Patrick

> >
> > I have not worked with the 3DC, but I remember some of the older raid
> > controllers based on the AMI board set the second volume ( container )
> > as LUN1, where the first unit was LUN0. So it was
> >
> > amird controller 0 bus 0 id 0 lun 0
> > amird controller 0 bus 0 id 0 lun 1
> >
> > Mike
> >
> > --
> > Michael Brown
> >
> > The Kingsway Group

>
> Yep i'd read that too ... but it still seems to have issues picking the
> second container up. I installed 2k server this morning to check it wasn't
> something i'd forgotten to do with the drives and that worked. I've also
> tried the controller card in H20 mode and mass storage mode.
>
> Any other suggestions gratefully recieved at this point in time ;)
>
> Cheers.
>
> Patrick.
>
>

Weird, changed drives back to I20 mode.

used mkdev hd 0 SCSI-0 1 amird 0

Rebooted and repeated command and lo and behold there's my new disk!!

Just got to mount and format it now ;)

[Richard Lentini]

Thanks, Paul and I will check into the new version of WS_FTP but in the
meantime I solved my own problem. I checked "passive ftp" in Dreamweaver
and it now works fine. Actually, I got the tip from a previous newsgroup
message. That shows the power of newsgroups I guess.
Thanks again.
Richard

"Richard Lentini" <richlen@adelphia.net> wrote in message
news:CsoPa.11291$Hw.8579403@news2.news.adelphia.ne t...

> I recently published a site with Dreamweaver MX and everything was working
> fine until today. Now I cannot "put" or "get" files with Dreamweaver. My
> computer locks up whenever I try to transfer a file. I have all the

correct

> addressing but it locks up consistently. I am using win 2000. It locks up
> immediately after saying "connected to remote site". I can transfer files

to

> the host using another program such as the ws_ftp program. I cannot think
> of anything I did to cause this problem. I loaded Dreamweaver onto two
> other machines and I get the exact same results. What is going on? Does
> anybody know? The Host site people are not much help. Thanks.
>
> Richard
>
>

[Mike Brown]

Fester wrote:

>
> "Fester" <fester@nospamtagmx.co.uk> wrote in message
> news:bemk3u$hb0$1@newsreaderm1.core.theplanet.net. ..

> >
> > "Mike Brown" <mike@tkg.ca> wrote in message

> news:3F0ECAA3.4069C2FA@tkg.ca...

> > > Fester wrote:
> > > >
> > > > I'm running SCO 5.0.5 on a Dell Poweredge 4600 with 4 drives. Two
> > > > containers, two drives per container. Using the Dell Percraid 3DC. I'm
> > > > running the "amird" drivers which seem to work well except when i want

> > to

> > > > add the second container i can see no way to do this.
> > > >
> > > > Yes i've tried every combination of mkdev hd i can think of and

> sconf -v

> > > > doesn't show anything more than i can see already.
> > > >
> > > > Has anyone else mananged to get this working???
> > > >
> > > > I'm pulling out what's left my hair here:(
> > > >
> > > > Cheers.
> > > >
> > > > Patrick
> > >
> > > I have not worked with the 3DC, but I remember some of the older raid
> > > controllers based on the AMI board set the second volume ( container )
> > > as LUN1, where the first unit was LUN0. So it was
> > >
> > > amird controller 0 bus 0 id 0 lun 0
> > > amird controller 0 bus 0 id 0 lun 1
> > >
> > > Mike
> > >
> > > --
> > > Michael Brown
> > >
> > > The Kingsway Group

> >
> > Yep i'd read that too ... but it still seems to have issues picking the
> > second container up. I installed 2k server this morning to check it wasn't
> > something i'd forgotten to do with the drives and that worked. I've also
> > tried the controller card in H20 mode and mass storage mode.
> >
> > Any other suggestions gratefully recieved at this point in time ;)
> >
> > Cheers.
> >
> > Patrick.
> >
> >

> Weird, changed drives back to I20 mode.
>
> used mkdev hd 0 SCSI-0 1 amird 0
>
> Rebooted and repeated command and lo and behold there's my new disk!!
>
> Just got to mount and format it now ;)

Thanks for posting the info back.

I did not know that drives have I2O mode, did you mean the raid controller?

The command would be consistent with the second container having a LUN of 1,

mkdev hd ID number lun ha [ bus ]

where the SCSI ID is 0
the controller is SCSI-0
LUN is 1
the host adapter is amird
and on bus 0

Did you try this command before loading WIN2K and had it fail, but it worked
after the 2K load?

Mike

--
Michael Brown

The Kingsway Group

[Fester]

"Mike Brown" <mike@tkg.ca> wrote in message news:3F1039AB.80D6144F@tkg.ca...

> Fester wrote:

> >
> > "Fester" <fester@nospamtagmx.co.uk> wrote in message
> > news:bemk3u$hb0$1@newsreaderm1.core.theplanet.net. ..

> > >
> > > "Mike Brown" <mike@tkg.ca> wrote in message

> > news:3F0ECAA3.4069C2FA@tkg.ca...

> > > > Fester wrote:
> > > > >
> > > > > I'm running SCO 5.0.5 on a Dell Poweredge 4600 with 4 drives. Two
> > > > > containers, two drives per container. Using the Dell Percraid 3DC.

I'm

> > > > > running the "amird" drivers which seem to work well except when i

want

> > > to
> > > > > add the second container i can see no way to do this.
> > > > >
> > > > > Yes i've tried every combination of mkdev hd i can think of and

> > sconf -v

> > > > > doesn't show anything more than i can see already.
> > > > >
> > > > > Has anyone else mananged to get this working???
> > > > >
> > > > > I'm pulling out what's left my hair here:(
> > > > >
> > > > > Cheers.
> > > > >
> > > > > Patrick
> > > >
> > > > I have not worked with the 3DC, but I remember some of the older

raid

> > > > controllers based on the AMI board set the second volume (

container )

> > > > as LUN1, where the first unit was LUN0. So it was
> > > >
> > > > amird controller 0 bus 0 id 0 lun 0
> > > > amird controller 0 bus 0 id 0 lun 1
> > > >
> > > > Mike
> > > >
> > > > --
> > > > Michael Brown
> > > >
> > > > The Kingsway Group
> > >
> > > Yep i'd read that too ... but it still seems to have issues picking

the

> > > second container up. I installed 2k server this morning to check it

wasn't

> > > something i'd forgotten to do with the drives and that worked. I've

also

> > > tried the controller card in H20 mode and mass storage mode.
> > >
> > > Any other suggestions gratefully recieved at this point in time ;)
> > >
> > > Cheers.
> > >
> > > Patrick.
> > >
> > >

> > Weird, changed drives back to I20 mode.
> >
> > used mkdev hd 0 SCSI-0 1 amird 0
> >
> > Rebooted and repeated command and lo and behold there's my new disk!!
> >
> > Just got to mount and format it now ;)

>
> Thanks for posting the info back.
>
> I did not know that drives have I2O mode, did you mean the raid

controller?

>
> The command would be consistent with the second container having a LUN of

1,

>
> mkdev hd ID number lun ha [ bus ]
>
> where the SCSI ID is 0
> the controller is SCSI-0
> LUN is 1
> the host adapter is amird
> and on bus 0
>
> Did you try this command before loading WIN2K and had it fail, but it

worked

> after the 2K load?
>
> Mike
>
> --
> Michael Brown
>
> The Kingsway Group

Yup ... very odd. I'm no master SCO installer, but i'm pretty good with
hardware and the like and this really threw me off. Still don't get why
win2k worked and sco didn't and then on the retry it now worked.

[Dan Vendel *GOF*]

"twisted-solutions" [email]webforumsuser@macromedia.com[/email] wrote:

> please see the thred titled dreamweaver mx
>
>
>

Please *DO NOT* post the same question twice within minutes!
Short answer: No.
Long answer: No, it can't. You need to tell it what to write. Or you can
get a free cart like e.g. [url]www.oscommerce.com[/url]. Then you'll need a host
with SSI, etc.


Dan Vendel - *GOF*
[url]http://www.vendel.info[/url]
Contact me directly by clicking here:
[url]http://contact.vendel.info[/url]
Formmail tutorial:
[url]http://www.vendel.info/tut/formmail.html[/url]
Nested table demonstration:
[url]http://www.vendel.info/tabletut/[/url]

[Chris Veness]

Alexander Ross is right - Dreamweaver will do simple e-commerce functions
without programming, but don't expect too much.

If you want an e-commerce site with decent functionality and which doesn't
break, you'd better be prepared to do some reading up on what's involved, or
else pay someone who has...


"twisted-solutions" <webforumsuser@macromedia.com> wrote in message
news:bfjdjt$dko$1@forums.macromedia.com...

> please see the thred titled dreamweaver mx

[john smtih]

Hi, i have a logo, and i want to insert a picture of a guitar. The guitar i have has a white background. So how would i crop everything but the guitar. It's obviously round and has curves, so how would i trace the guitar out?

Thanks

[Colin Walls]

Depends a lot on the image. Theer are whole books on this topic ...

For starters, try clicking on the white background with the magic wand. May need to follow this up with the Select Similar command. Then invert the selection [SHFT-CTRL-I] and copy to a new layer [CTRL-J].

[Josh Conley]

if that doesnt work go into Edit>Extract