Professional Web Applications Themes

How to get idebus > 66? - Linux Setup, Configuration & Administration

So as far as I know, I've got one of the new system buses that runs at 400mhz. Actually, the specs on my machine are FSB 800. But I can never remember if it's a 200mhz bus that's quad pumped or a 400mhz bus that's doubled. So I'm trying to add the line: append = "idebus=400" to my /etc/lilo.conf and it gives me an error at boot claiming that valid rages are from 20-60. I know there has to be a way around this. AFAIK I've got my kernel configured correctly (config attached). But it barfs at anything above 66. ...

  1. #1

    Default How to get idebus > 66?

    So as far as I know, I've got one of the new system buses that runs at
    400mhz. Actually, the specs on my machine are FSB 800. But I can never
    remember if it's a 200mhz bus that's quad pumped or a 400mhz bus that's
    doubled. So I'm trying to add the line:

    append = "idebus=400"

    to my /etc/lilo.conf and it gives me an error at boot claiming that
    valid rages are from 20-60. I know there has to be a way around this.
    AFAIK I've got my kernel configured correctly (config attached). But it
    barfs at anything above 66.

    I'm running Slackware 9.1 with kernel 2.4.22. My box is one of those
    new laptops (Sager 5680 ... same as Hypersonic GX6 and Eurocom D500p)
    with the 865PE chipset.

    Thanks,

    DT

    --
    Technical Director - Virginia Center for Computer Music
    http://www.virginia.edu/music/vccm.html


    #
    # Automatically generated by make menuconfig: don't edit
    #
    CONFIG_X86=y
    # CONFIG_SBUS is not set
    CONFIG_UID16=y

    #
    # Code maturity level options
    #
    # CONFIG_EXPERIMENTAL is not set

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODVERSIONS=y
    CONFIG_KMOD=y

    #
    # Processor type and features
    #
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMIII is not set
    CONFIG_MPENTIUM4=y
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MELAN is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_X86_L1_CACHE_SHIFT=7
    CONFIG_X86_HAS_TSC=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_PGE=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_X86_F00F_WORKS_OK=y
    CONFIG_X86_MCE=y
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    # CONFIG_MICROCODE is not set
    CONFIG_X86_MSR=m
    CONFIG_X86_CPUID=m
    # CONFIG_NOHIGHMEM is not set
    CONFIG_HIGHMEM4G=y
    # CONFIG_HIGHMEM64G is not set
    CONFIG_HIGHMEM=y
    CONFIG_HIGHIO=y
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_SMP is not set
    # CONFIG_X86_UP_APIC is not set
    # CONFIG_X86_UP_IOAPIC is not set
    # CONFIG_X86_TSC_DISABLE is not set
    CONFIG_X86_TSC=y

    #
    # General setup
    #
    CONFIG_NET=y
    CONFIG_PCI=y
    CONFIG_PCI_GOBIOS=y
    # CONFIG_PCI_GODIRECT is not set
    # CONFIG_PCI_GOANY is not set
    CONFIG_PCI_BIOS=y
    CONFIG_ISA=y
    CONFIG_PCI_NAMES=y
    # CONFIG_EISA is not set
    # CONFIG_MCA is not set
    CONFIG_HOTPLUG=y

    #
    # PCMCIA/CardBus support
    #
    CONFIG_PCMCIA=m
    CONFIG_CARDBUS=y
    # CONFIG_TCIC is not set
    # CONFIG_I82092 is not set
    # CONFIG_I82365 is not set

    #
    # PCI Hotplug Support
    #
    # CONFIG_HOTPLUG_PCI is not set
    # CONFIG_HOTPLUG_PCI_COMPAQ is not set
    # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
    CONFIG_SYSVIPC=y
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_SYSCTL=y
    CONFIG_KCORE_ELF=y
    # CONFIG_KCORE_AOUT is not set
    CONFIG_BINFMT_AOUT=m
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_MISC=m
    CONFIG_PM=y
    CONFIG_APM=m
    # CONFIG_APM_IGNORE_USER_SUSPEND is not set
    CONFIG_APM_DO_ENABLE=y
    # CONFIG_APM_CPU_IDLE is not set
    # CONFIG_APM_DISPLAY_BLANK is not set
    # CONFIG_APM_RTC_IS_GMT is not set
    # CONFIG_APM_ALLOW_INTS is not set
    # CONFIG_APM_REAL_MODE_POWER_OFF is not set

    #
    # ACPI Support
    #
    # CONFIG_ACPI is not set

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Parallel port support
    #
    CONFIG_PARPORT=m
    CONFIG_PARPORT_PC=m
    CONFIG_PARPORT_PC_CML1=m
    # CONFIG_PARPORT_SERIAL is not set
    # CONFIG_PARPORT_PC_PCMCIA is not set
    # CONFIG_PARPORT_AMIGA is not set
    # CONFIG_PARPORT_MFC3 is not set
    # CONFIG_PARPORT_ATARI is not set
    # CONFIG_PARPORT_GSC is not set
    # CONFIG_PARPORT_SUNBPP is not set
    # CONFIG_PARPORT_OTHER is not set
    CONFIG_PARPORT_1284=y

    #
    # Plug and Play configuration
    #
    CONFIG_PNP=m
    CONFIG_ISAPNP=m

    #
    # Block devices
    #
    CONFIG_BLK_DEV_FD=m
    CONFIG_BLK_DEV_XD=m
    CONFIG_PARIDE=m
    CONFIG_PARIDE_PARPORT=m
    CONFIG_PARIDE_PD=m
    CONFIG_PARIDE_PCD=m
    CONFIG_PARIDE_PF=m
    CONFIG_PARIDE_PT=m
    CONFIG_PARIDE_PG=m
    # CONFIG_PARIDE_ATEN is not set
    # CONFIG_PARIDE_BPCK is not set
    # CONFIG_PARIDE_BPCK6 is not set
    # CONFIG_PARIDE_COMM is not set
    # CONFIG_PARIDE_DSTR is not set
    # CONFIG_PARIDE_FIT2 is not set
    # CONFIG_PARIDE_FIT3 is not set
    # CONFIG_PARIDE_EPAT is not set
    # CONFIG_PARIDE_EPIA is not set
    # CONFIG_PARIDE_FRIQ is not set
    # CONFIG_PARIDE_FRPW is not set
    # CONFIG_PARIDE_KBIC is not set
    # CONFIG_PARIDE_KTTI is not set
    # CONFIG_PARIDE_ON20 is not set
    # CONFIG_PARIDE_ON26 is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_CISS_SCSI_TAPE is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_LOOP is not set
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_RAM is not set
    # CONFIG_BLK_DEV_INITRD is not set
    # CONFIG_BLK_STATS is not set

    #
    # Multi-device support (RAID and LVM)
    #
    # CONFIG_MD is not set
    # CONFIG_BLK_DEV_MD is not set
    # CONFIG_MD_LINEAR is not set
    # CONFIG_MD_RAID0 is not set
    # CONFIG_MD_RAID1 is not set
    # CONFIG_MD_RAID5 is not set
    # CONFIG_MD_MULTIPATH is not set
    # CONFIG_BLK_DEV_LVM is not set

    #
    # Networking options
    #
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    CONFIG_NETLINK_DEV=m
    # CONFIG_NETFILTER is not set
    # CONFIG_FILTER is not set
    CONFIG_UNIX=y
    CONFIG_INET=y
    # CONFIG_IP_MULTICAST is not set
    # CONFIG_IP_ADVANCED_ROUTER is not set
    # CONFIG_IP_PNP is not set
    # CONFIG_NET_IPIP is not set
    CONFIG_NET_IPGRE=m
    # CONFIG_INET_ECN is not set
    CONFIG_SYN_COOKIES=y
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set

    #
    # Appletalk devices
    #
    # CONFIG_DEV_APPLETALK is not set
    # CONFIG_DECNET is not set
    # CONFIG_BRIDGE is not set

    #
    # QoS and/or fair queueing
    #
    # CONFIG_NET_SCHED is not set

    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set

    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set
    # CONFIG_PHONE_IXJ is not set
    # CONFIG_PHONE_IXJ_PCMCIA is not set

    #
    # ATA/IDE/MFM/RLL support
    #
    CONFIG_IDE=y

    #
    # IDE, ATA and ATAPI Block devices
    #
    CONFIG_BLK_DEV_IDE=y
    # CONFIG_BLK_DEV_HD_IDE is not set
    # CONFIG_BLK_DEV_HD is not set
    CONFIG_BLK_DEV_IDEDISK=y
    # CONFIG_IDEDISK_MULTI_MODE is not set
    # CONFIG_IDEDISK_STROKE is not set
    CONFIG_BLK_DEV_IDECS=m
    CONFIG_BLK_DEV_IDECD=m
    CONFIG_BLK_DEV_IDETAPE=m
    CONFIG_BLK_DEV_IDEFLOPPY=m
    # CONFIG_BLK_DEV_IDESCSI is not set
    # CONFIG_IDE_TASK_IOCTL is not set
    # CONFIG_BLK_DEV_CMD640 is not set
    # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
    # CONFIG_BLK_DEV_ISAPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_BLK_DEV_GENERIC=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_PCI_WIP is not set
    # CONFIG_BLK_DEV_ADMA100 is not set
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    # CONFIG_WDC_ALI15X3 is not set
    # CONFIG_BLK_DEV_AMD74XX is not set
    # CONFIG_AMD74XX_OVERRIDE is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_HPT34X_AUTODMA is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    CONFIG_BLK_DEV_PIIX=y
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_PDC202XX_BURST is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82C is not set
    # CONFIG_IDE_CHIPSETS is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_IDEDMA_IVB is not set
    # CONFIG_DMA_NONPCI is not set
    CONFIG_BLK_DEV_IDE_MODES=y
    # CONFIG_BLK_DEV_ATARAID is not set
    # CONFIG_BLK_DEV_ATARAID_PDC is not set
    # CONFIG_BLK_DEV_ATARAID_HPT is not set
    # CONFIG_BLK_DEV_ATARAID_SII is not set

    #
    # SCSI support
    #
    # CONFIG_SCSI is not set

    #
    # Fusion MPT device support
    #
    # CONFIG_FUSION is not set
    # CONFIG_FUSION_BOOT is not set
    # CONFIG_FUSION_ISENSE is not set
    # CONFIG_FUSION_CTL is not set
    # CONFIG_FUSION_LAN is not set

    #
    # I2O device support
    #
    # CONFIG_I2O is not set
    # CONFIG_I2O_PCI is not set
    # CONFIG_I2O_BLOCK is not set
    # CONFIG_I2O_LAN is not set
    # CONFIG_I2O_SCSI is not set
    # CONFIG_I2O_PROC is not set

    #
    # Network device support
    #
    CONFIG_NETDEVICES=y

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set
    CONFIG_DUMMY=m
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_NET_SB1000 is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    # CONFIG_NET_ETHERNET is not set

    #
    # Ethernet (1000 Mbit)
    #
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_MYRI_SBUS is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    CONFIG_R8169=m
    # CONFIG_SK98LIN is not set
    # CONFIG_TIGON3 is not set
    # CONFIG_FDDI is not set
    # CONFIG_PLIP is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set

    #
    # Wireless LAN (non-hamradio)
    #
    CONFIG_NET_RADIO=y
    # CONFIG_STRIP is not set
    # CONFIG_WAVELAN is not set
    # CONFIG_ARLAN is not set
    # CONFIG_AIRONET4500 is not set
    # CONFIG_AIRONET4500_NONCS is not set
    # CONFIG_AIRONET4500_PROC is not set
    # CONFIG_AIRO is not set
    CONFIG_HERMES=m
    # CONFIG_PLX_HERMES is not set
    # CONFIG_PCI_HERMES is not set
    # CONFIG_PCMCIA_HERMES is not set
    # CONFIG_AIRO_CS is not set
    CONFIG_NET_WIRELESS=y

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set
    # CONFIG_NET_FC is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set

    #
    # PCMCIA network device support
    #
    # CONFIG_NET_PCMCIA is not set

    #
    # Amateur Radio support
    #
    # CONFIG_HAMRADIO is not set

    #
    # IrDA (infrared) support
    #
    # CONFIG_IRDA is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # Old CD-ROM drivers (not SCSI, not IDE)
    #
    # CONFIG_CD_NO_IDESCSI is not set

    #
    # Input core support
    #
    CONFIG_INPUT=m
    CONFIG_INPUT_KEYBDEV=m
    CONFIG_INPUT_MOUSEDEV=m
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    CONFIG_INPUT_JOYDEV=m
    CONFIG_INPUT_EVDEV=m

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_SERIAL=y
    CONFIG_SERIAL_CONSOLE=y
    CONFIG_SERIAL_EXTENDED=y
    CONFIG_SERIAL_MANY_PORTS=y
    CONFIG_SERIAL_SHARE_IRQ=y
    # CONFIG_SERIAL_DETECT_IRQ is not set
    CONFIG_SERIAL_MULTIPORT=y
    CONFIG_HUB6=y
    # CONFIG_SERIAL_NONSTANDARD is not set
    # CONFIG_UNIX98_PTYS is not set
    CONFIG_PRINTER=m
    # CONFIG_LP_CONSOLE is not set
    CONFIG_PPDEV=m
    # CONFIG_TIPAR is not set

    #
    # I2C support
    #
    CONFIG_I2C=m
    CONFIG_I2C_ALGOBIT=m
    CONFIG_I2C_PHILIPSPAR=m
    CONFIG_I2C_ELV=m
    CONFIG_I2C_VELLEMAN=m
    # CONFIG_SCx200_I2C is not set
    # CONFIG_SCx200_ACB is not set
    CONFIG_I2C_ALGOPCF=m
    CONFIG_I2C_ELEKTOR=m
    CONFIG_I2C_CHARDEV=m
    CONFIG_I2C_PROC=m

    #
    # Mice
    #
    CONFIG_BUSMOUSE=m
    # CONFIG_ATIXL_BUSMOUSE is not set
    # CONFIG_LOGIBUSMOUSE is not set
    # CONFIG_MS_BUSMOUSE is not set
    CONFIG_MOUSE=y
    CONFIG_PSMOUSE=y
    # CONFIG_82C710_MOUSE is not set
    # CONFIG_PC110_PAD is not set
    # CONFIG_MK712_MOUSE is not set

    #
    # Joysticks
    #
    # CONFIG_INPUT_GAMEPORT is not set
    # CONFIG_INPUT_NS558 is not set
    # CONFIG_INPUT_LIGHTNING is not set
    # CONFIG_INPUT_PCIGAME is not set
    # CONFIG_INPUT_CS461X is not set
    # CONFIG_INPUT_EMU10K1 is not set
    # CONFIG_INPUT_SERIO is not set
    # CONFIG_INPUT_SERPORT is not set
    # CONFIG_INPUT_OG is not set
    # CONFIG_INPUT_A3D is not set
    # CONFIG_INPUT_ADI is not set
    # CONFIG_INPUT_COBRA is not set
    # CONFIG_INPUT_GF2K is not set
    # CONFIG_INPUT_GRIP is not set
    # CONFIG_INPUT_INTERACT is not set
    # CONFIG_INPUT_TMDC is not set
    # CONFIG_INPUT_SIDEWINDER is not set
    # CONFIG_INPUT_IFORCE_USB is not set
    # CONFIG_INPUT_IFORCE_232 is not set
    # CONFIG_INPUT_WARRIOR is not set
    # CONFIG_INPUT_MAGELLAN is not set
    # CONFIG_INPUT_SPACEORB is not set
    # CONFIG_INPUT_SPACEBALL is not set
    # CONFIG_INPUT_STINGER is not set
    # CONFIG_INPUT_DB9 is not set
    # CONFIG_INPUT_GAMECON is not set
    # CONFIG_INPUT_TURBOGRAFX is not set
    # CONFIG_QIC02_TAPE is not set
    # CONFIG_IPMI_HANDLER is not set
    # CONFIG_IPMI_PANIC_EVENT is not set
    # CONFIG_IPMI_DEVICE_INTERFACE is not set
    # CONFIG_IPMI_KCS is not set
    # CONFIG_IPMI_WATCHDOG is not set

    #
    # Watchdog Cards
    #
    # CONFIG_WATCHDOG is not set
    # CONFIG_SCx200_GPIO is not set
    # CONFIG_AMD_RNG is not set
    # CONFIG_INTEL_RNG is not set
    # CONFIG_AMD_PM768 is not set
    # CONFIG_NVRAM is not set
    CONFIG_RTC=y
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set

    #
    # Ftape, the floppy tape device driver
    #
    # CONFIG_FTAPE is not set
    CONFIG_AGP=m
    CONFIG_AGP_INTEL=y
    # CONFIG_AGP_I810 is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD_8151 is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_ALI is not set
    # CONFIG_AGP_SWORKS is not set
    # CONFIG_AGP_NVIDIA is not set
    CONFIG_DRM=y
    # CONFIG_DRM_OLD is not set
    CONFIG_DRM_NEW=y
    # CONFIG_DRM_TDFX is not set
    # CONFIG_DRM_R128 is not set
    CONFIG_DRM_RADEON=m
    # CONFIG_DRM_I810 is not set
    # CONFIG_DRM_I810_XFREE_41 is not set
    # CONFIG_DRM_I830 is not set
    # CONFIG_DRM_MGA is not set
    # CONFIG_DRM_SIS is not set

    #
    # PCMCIA character devices
    #
    CONFIG_PCMCIA_SERIAL_CS=m
    CONFIG_SYNCLINK_CS=m
    # CONFIG_MWAVE is not set

    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set

    #
    # File systems
    #
    CONFIG_QUOTA=y
    CONFIG_QFMT_V2=m
    # CONFIG_AUTOFS_FS is not set
    # CONFIG_AUTOFS4_FS is not set
    CONFIG_REISERFS_FS=y
    # CONFIG_REISERFS_CHECK is not set
    CONFIG_REISERFS_PROC_INFO=y
    # CONFIG_ADFS_FS is not set
    # CONFIG_ADFS_FS_RW is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BEFS_DEBUG is not set
    # CONFIG_BFS_FS is not set
    CONFIG_EXT3_FS=y
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_UMSDOS_FS=y
    CONFIG_VFAT_FS=y
    # CONFIG_EFS_FS is not set
    # CONFIG_JFFS_FS is not set
    # CONFIG_JFFS2_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_TMPFS is not set
    CONFIG_RAMFS=y
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    # CONFIG_JFS_FS is not set
    # CONFIG_JFS_DEBUG is not set
    # CONFIG_JFS_STATISTICS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_VXFS_FS is not set
    CONFIG_NTFS_FS=m
    # CONFIG_NTFS_RW is not set
    # CONFIG_HPFS_FS is not set
    CONFIG_PROC_FS=y
    # CONFIG_DEVFS_FS is not set
    # CONFIG_DEVFS_MOUNT is not set
    # CONFIG_DEVFS_DEBUG is not set
    # CONFIG_DEVPTS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_QNX4FS_RW is not set
    # CONFIG_ROMFS_FS is not set
    CONFIG_EXT2_FS=y
    # CONFIG_SYSV_FS is not set
    # CONFIG_UDF_FS is not set
    # CONFIG_UDF_RW is not set
    # CONFIG_UFS_FS is not set
    # CONFIG_UFS_FS_WRITE is not set

    #
    # Network File Systems
    #
    CONFIG_CODA_FS=m
    # CONFIG_INTERMEZZO_FS is not set
    CONFIG_NFS_FS=y
    CONFIG_NFS_V3=y
    # CONFIG_NFS_DIRECTIO is not set
    # CONFIG_ROOT_NFS is not set
    CONFIG_NFSD=m
    CONFIG_NFSD_V3=y
    # CONFIG_NFSD_TCP is not set
    CONFIG_SUNRPC=y
    CONFIG_LOCKD=y
    CONFIG_LOCKD_V4=y
    CONFIG_SMB_FS=m
    # CONFIG_SMB_NLS_DEFAULT is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_NCPFS_PACKET_SIGNING is not set
    # CONFIG_NCPFS_IOCTL_LOCKING is not set
    # CONFIG_NCPFS_STRONG is not set
    # CONFIG_NCPFS_NFS_NS is not set
    # CONFIG_NCPFS_OS2_NS is not set
    # CONFIG_NCPFS_SMALLDOS is not set
    # CONFIG_NCPFS_NLS is not set
    # CONFIG_NCPFS_EXTRAS is not set
    CONFIG_ZISOFS_FS=y

    #
    # Partition Types
    #
    CONFIG_PARTITION_ADVANCED=y
    # CONFIG_ACORN_PARTITION is not set
    # CONFIG_OSF_PARTITION is not set
    # CONFIG_AMIGA_PARTITION is not set
    # CONFIG_ATARI_PARTITION is not set
    # CONFIG_MAC_PARTITION is not set
    CONFIG_MSDOS_PARTITION=y
    # CONFIG_BSD_DISKLABEL is not set
    # CONFIG_MINIX_SUBPARTITION is not set
    # CONFIG_SOLARIS_X86_PARTITION is not set
    # CONFIG_UNIXWARE_DISKLABEL is not set
    # CONFIG_LDM_PARTITION is not set
    # CONFIG_SGI_PARTITION is not set
    # CONFIG_ULTRIX_PARTITION is not set
    # CONFIG_SUN_PARTITION is not set
    # CONFIG_EFI_PARTITION is not set
    CONFIG_SMB_NLS=y
    CONFIG_NLS=y

    #
    # Native Language Support
    #
    CONFIG_NLS_DEFAULT="cp437"
    CONFIG_NLS_CODEPAGE_437=y
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    # CONFIG_NLS_CODEPAGE_850 is not set
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    # CONFIG_NLS_ISO8859_1 is not set
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    # CONFIG_NLS_ISO8859_15 is not set
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    # CONFIG_NLS_UTF8 is not set

    #
    # Console drivers
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_VIDEO_SELECT is not set

    #
    # Sound
    #
    # CONFIG_SOUND is not set

    #
    # USB support
    #
    CONFIG_USB=m
    # CONFIG_USB_DEBUG is not set
    CONFIG_USB_DEVICEFS=y
    # CONFIG_USB_BANDWIDTH is not set
    # CONFIG_USB_EHCI_HCD is not set
    CONFIG_USB_UHCI=m
    CONFIG_USB_UHCI_ALT=m
    CONFIG_USB_OHCI=m
    # CONFIG_USB_AUDIO is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_MIDI is not set
    # CONFIG_USB_STORAGE is not set
    # CONFIG_USB_STORAGE_DEBUG is not set
    # CONFIG_USB_STORAGE_DATAFAB is not set
    # CONFIG_USB_STORAGE_FREECOM is not set
    # CONFIG_USB_STORAGE_ISD200 is not set
    # CONFIG_USB_STORAGE_DPCM is not set
    # CONFIG_USB_STORAGE_HP8200e is not set
    # CONFIG_USB_STORAGE_SDDR09 is not set
    # CONFIG_USB_STORAGE_SDDR55 is not set
    # CONFIG_USB_STORAGE_JUMPSHOT is not set
    CONFIG_USB_ACM=m
    CONFIG_USB_PRINTER=m
    CONFIG_USB_HID=m
    CONFIG_USB_HIDINPUT=y
    CONFIG_USB_HIDDEV=y
    CONFIG_USB_KBD=m
    CONFIG_USB_MOUSE=m
    # CONFIG_USB_AIPTEK is not set
    # CONFIG_USB_WACOM is not set
    # CONFIG_USB_KBTAB is not set
    # CONFIG_USB_POWERMATE is not set
    # CONFIG_USB_DC2XX is not set
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_SCANNER is not set
    # CONFIG_USB_MICROTEK is not set
    # CONFIG_USB_HPUSBSCSI is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_AX8817X is not set
    # CONFIG_USB_CDCETHER is not set
    # CONFIG_USB_USBNET is not set
    # CONFIG_USB_USS720 is not set

    #
    # USB Serial Converter support
    #
    # CONFIG_USB_SERIAL is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_TIGL is not set
    # CONFIG_USB_BRLVGER is not set
    # CONFIG_USB_LCD is not set

    #
    # Bluetooth support
    #
    # CONFIG_BLUEZ is not set

    #
    # Kernel hacking
    #
    # CONFIG_DEBUG_KERNEL is not set

    #
    # Cryptographic options
    #
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_HMAC=y
    CONFIG_CRYPTO_NULL=m
    CONFIG_CRYPTO_MD4=m
    CONFIG_CRYPTO_MD5=m
    CONFIG_CRYPTO_SHA1=m
    CONFIG_CRYPTO_SHA256=m
    CONFIG_CRYPTO_SHA512=m
    CONFIG_CRYPTO_DES=m
    CONFIG_CRYPTO_FISH=m
    CONFIG_CRYPTO_TWOFISH=m
    CONFIG_CRYPTO_SERPENT=m
    CONFIG_CRYPTO_AES=m
    CONFIG_CRYPTO_DEFLATE=m
    CONFIG_CRYPTO_TEST=m

    #
    # Library routines
    #
    CONFIG_CRC32=m
    CONFIG_ZLIB_INFLATE=y
    CONFIG_ZLIB_DEFLATE=m

    David Guest

  2. #2

    Default Re: How to get idebus > 66?

    David Topper wrote:
     

    FSB != idebus, see the HOWTO's
    Baho Guest

  3. #3

    Default Re: How to get idebus > 66?

    Baho Utot wrote:
     
    Which ones? I've been cruising around and none of the howtos seem to
    have the info on idebus, ATA-100 or FSB specs / tweaks. I've checked
    the kernel howto, pci howto, and io-perf, howto.

    Thanks,

    DT

    David Guest

  4. #4

    Default Re: How to get idebus > 66?

    you can implement following to reality: hdparm -d1 -X66 /dev/devices

    "David Topper" <edu> ????
    news:boclpn$rp7$acc.Virginia.EDU... 
    > Which ones? I've been cruising around and none of the howtos seem to
    > have the info on idebus, ATA-100 or FSB specs / tweaks. I've checked
    > the kernel howto, pci howto, and io-perf, howto.
    >
    > Thanks,
    >
    > DT
    >[/ref]


    Steven Guest

  5. #5

    Default Re: How to get idebus > 66?

    On Wed, 05 Nov 2003 19:31:32 -0500, David Topper wrote:
     

    That setting is for the pci bus.
    It is an indication of the speed between the pci-controller and
    the ide-controller. You only need to change it if you have a 66mhz pci bus
    (the big 64bit ones).

    By changing this all you are doing is overclocking your pci bus, expect
    very weird things to happen.

    Jayson Garrell
    Jayson Guest

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139