Professional Web Applications Themes

How to manage color? (FrameMaker 5.5, OSX/9.2.2, Tek740 Printer) - Mac Applications & Software

I am new to color management and need some help: Here's the problem: I assign Pantone Colors (eg Pantone 273 CVC) in FrameMaker 5.5 to objects, and they come out rather different (from Pantone samples on paper) on my Tektronix Phaser 740 Plus printer (now Xerox). I tried different settings in the Print dialog (no color correction, Europress, sRGB) to no avail. I try to copy a deep blue (highly saturated CM, no black in it/no YK) that was produced on an Epson 1270 Photo Printer (inkjet). The color comes out with too much black K in it. What am ...

  1. #1

    Default How to manage color? (FrameMaker 5.5, OSX/9.2.2, Tek740 Printer)

    I am new to color management and need some help:
    Here's the problem:
    I assign Pantone Colors (eg Pantone 273 CVC) in FrameMaker 5.5 to
    objects, and they come out rather different (from Pantone samples on
    paper) on my Tektronix Phaser 740 Plus printer (now Xerox).

    I tried different settings in the Print dialog (no color correction,
    Europress, sRGB) to no avail.

    I try to copy a deep blue (highly saturated CM, no black in it/no YK)
    that was produced on an Epson 1270 Photo Printer (inkjet).
    The color comes out with too much black K in it.
    What am I doing wrong?

    What worries me most is that I tried to change CM values in FrameMaker,
    and it did not make any difference (eg from 100% C, 94% M to 100% C, 89%
    M).

    I'd need instructions on what to install (and where to get it), settings
    etc.
    FrameMaker runs in Classic (9.2.2) under OS X (10.2.6)

    I cannot find ColorSync under the control panels in OS 9.
    Also I currently seem not to have installed an ICC color profile for the
    printer.

    The application is business stationery, flyers and business cards.

    Help in setting up ColorSync or any other hints most appreciated!

    TIA

    Marc

    --
    Marc Heusser - Zurich, Switzerland
    Coaching - Consulting - Counselling - Psychotherapy
    http://www.heusser.com
    remove the obvious CHEERS and MERCIAL... from the reply address
    to reply via e-mail
    Marc Guest

  2. #2

    Default Re: How to manage color? (FrameMaker 5.5, OSX/9.2.2, Tek740 Printer)

    In article <bluewin.ch>,
    Marc Heusser <comMERCIALSPAMMERS.invalid>
    wrote:
     
    [...] 

    Non-PostScript Inkjet printers usually expect RGB data, even though
    they use CMYK inks.
    If you send CMYK data to an inkjet printer, the CMYK values will be
    converted to RGB before printing. This conversion occurs in the
    printer, and you have no way of controlling it. The only way I know
    for cirventing this behavior is to reverse-engineer the printer
    driver in order to write your own custom driver.
    In summary, don't expect to get a good match between a CMYK file
    on a PostScript printer and the same file on an inkjet printer.
     

    That's strange, because ColorSync is automatically installed
    with OS 9. Maybe you should try installing it from your CD.
    I'm using FrameMaker 7 with exactly the same OS as you, and
    ColorSync is definitely available.

    You are not alone having problems with color management. Maybe
    it would be a good idea to visit Adobe's Color Management user
    forum, since the problem you are encountering is not specific to
    FrameMaker:
    <http://www.adobeforums.com/cgi-bin/webx?tvUPascg4se.0.eea5b31>

    I would also recommend the recently published "Real World Color
    Management", by Bruce Fraser et al. (ISBN 0-201-77340-6). It's
    a really thorough, practical introduction to this complex subject.

    Nicolas
    Nicolas Guest

  3. #3

    Default Re: How to manage color? (FrameMaker 5.5, OSX/9.2.2, Tek740Printer)

    There is some more information at my Web site,
    www.techknowledgecorp.com/help. Look in the left column about half way down
    for "working with color".


    Tim Guest

Similar Threads

  1. link color problem in PDF generated from Framemaker
    By Krisa_Bortz@adobeforums.com in forum Adobe Acrobat Windows
    Replies: 3
    Last Post: April 12th, 09:50 PM
  2. How do I know printer color management is disabled?
    By lycale@adobeforums.com in forum Adobe Photoshop Mac CS, CS2 & CS3
    Replies: 29
    Last Post: February 26th, 07:33 PM
  3. Best Color Laser Postscript Printer???
    By welchfluorocarbon in forum Macromedia Freehand
    Replies: 0
    Last Post: February 24th, 08:56 PM
  4. Send color text to printer
    By Garry Short in forum PERL Miscellaneous
    Replies: 1
    Last Post: August 5th, 03:12 PM
  5. b&w printing with 4 color printer
    By pat sandler in forum Adobe Photoshop 7, CS, CS2 & CS3
    Replies: 7
    Last Post: July 17th, 05:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139