Professional Web Applications Themes

Installing ATI Radeon video drivers on Redhat Advanced Server - Linux Setup, Configuration & Administration

Dear Experts, Sorry, I'm back. Now, I'm struggling with the video drivers on Redhat once again. I've spent about 6 hours so far. Hopefully someone will know the secret. I'm running: Redhat Advanced Server 2.1 ATI Radeon 9000 All-In-Wonder in the AGP slot Xfree86 4.1.0 I downloaded the driver from ATI. fglrx-glc22-4.1.0-3.7.0.i386.rpm I installed the package. Then, I tried running fglrxconfig, and Xconfigurator But both of them failed. ----------- The tail output from /var/log/XFree86.0.log is: (II) Primary Device is: PCI 01:00:0 (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:0) found (EE) No devices detected. Fatal server error: no ...

  1. #1

    Default Installing ATI Radeon video drivers on Redhat Advanced Server

    Dear Experts,

    Sorry, I'm back. Now, I'm struggling with the video
    drivers on Redhat once again. I've spent about 6 hours
    so far. Hopefully someone will know the secret.

    I'm running:
    Redhat Advanced Server 2.1
    ATI Radeon 9000 All-In-Wonder in the AGP slot
    Xfree86 4.1.0

    I downloaded the driver from ATI.
    fglrx-glc22-4.1.0-3.7.0.i386.rpm

    I installed the package. Then, I tried running
    fglrxconfig, and
    Xconfigurator

    But both of them failed.

    -----------

    The tail output from /var/log/XFree86.0.log is:

    (II) Primary Device is: PCI 01:00:0
    (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:0)
    found
    (EE) No devices detected.

    Fatal server error:
    no screens found

    -----------

    /lib/modules/fglrx/make_install.sh
    - creating symlink
    - recreating module dependency list
    depmod: *** Unresolved symbols in
    /lib/modules/2.4.9-e.3/kernel/drivers/char/drm/fglrx.o
    failed.

    strings /usr/X11R6/lib/libGL.so.1 | grep dlsym
    dlsym

    -----------


    lspci shows:

    01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown
    device 4966 (rev 01)
    01:00.1 Display controller: ATI Technologies Inc: Unknown device 496e
    (rev 01)


    ------------

    try to run: startx
    and get much the same output as before:


    (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
    ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
    ATI Radeon Mobility LZ (AGP)
    (--) Assigning device section with no busID to primary device
    (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1)
    found
    (EE) No devices detected.

    Fatal server error:
    no screens found


    When reporting a problem related to a server crash, please send
    the full server output, not just the last messages.
    This can be found in the log file "/var/log/XFree86.0.log".
    Please report problems to org.

    XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
    after 0 requests (0 known processed) with 0 events remaining.


    ---------------

    The interesting thing is the config file: XF86Config-4
    (below) The Video card is unknown!


    ---------------

    When I installed with Suse, it automatically chose these
    settings automatically, and it worked perfectly fine. I don't
    need any 3D. I just need it work with regular graphics.


    ATI RV250 lf(radeon)
    connected to monitor NEC XV15+ (1280 x 1024 16bit)
    3D acceleration disabled.

    Where could I get this driver?


    --------------


    Does anyone have a working ATI config file that
    they could post?


    Thanks a lot!



    --------------
    Config file: XF86Config-4

    # XFree86 4.0 configuration generated by Xconfigurator

    Section "ServerLayout"
    Identifier "XFree86 Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection

    # By default, Red Hat Linux 6.0 and later use xfs

    Section "Files"
    FontPath "unix/:7100"
    EndSection

    # Module loading section

    Section "Module"
    Load "dbe" # Double-buffering
    Load "GLcore" # OpenGL support
    Load "dri" # Direct rendering infrastructure
    Load "glx" # OpenGL X protocol interface
    Load "extmod" # Misc. required extensions
    Load "v4l" # Video4Linux
    # Load "pex5" # PHIGS for X 3D environment (obsolete)
    # Load "record" # X event recorder
    # Load "xie" # X Image Extension (obsolete)
    # You only need the following two modules if you do not use xfs.
    # Load "freetype" # TrueType font handler
    # Load "type1" # Adobe Type 1 font handler
    EndSection

    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "XkbLayout" "us"
    EndSection

    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Device" "/dev/mouse"
    Option "Protocol" "PS/2"
    Option "Emulate3Buttons" "off"
    Option "ZAxisMapping" "4 5"
    EndSection

    Section "Monitor"
    Identifier "NEC MultiSync XV15+"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 31.0-65.0
    VertRefresh 55.0-100.0
    Option "dpms"
    EndSection

    Section "Device"
    Identifier "My Video Card"
    Driver "radeon"
    BoardName "Unknown"
    Option "nodri"
    EndSection

    Section "Device"
    Identifier "Linux Frame Buffer"
    Driver "fbdev"
    BoardName "Unknown"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "My Video Card"
    Monitor "NEC MultiSync XV15+"
    DefaultDepth 16
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1152x864" "1024x768" "800x600"
    EndSubSection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1152x864" "1024x768" "800x600"
    EndSubSection
    EndSection

    Section "DRI"
    Mode 0666
    EndSection



    ----------
    linuxquestion@yahoo.com Guest

  2. Moderated Post

    Default Re: Installing ATI Radeon video drivers on Redhat Advanced Server

    Removed by Administrator
    linuxquestion@yahoo.com Guest
    Moderated Post

  3. #3

    Default Re: Installing ATI Radeon video drivers on Redhat Advanced Server

    Here is the file: XF86Config


    # File generated by XConfigurator.

    # ************************************************** ********************
    # Refer to the XF86Config(4/5) man page for details about the format
    of
    # this file.
    # ************************************************** ********************

    # ************************************************** ********************
    # Files section. This allows default font and rgb paths to be set
    # ************************************************** ********************

    Section "Files"

    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.

    RgbPath "/usr/X11R6/lib/X11/rgb"

    # Multiple FontPath entries are allowed (they are concatenated
    together)
    # By default, Red Hat 6.0 and later now use a font server independent
    of
    # the X server to render fonts.

    FontPath "unix/:7100"

    EndSection

    # ************************************************** ********************
    # Server flags section.
    # ************************************************** ********************

    Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal
    is
    # received. This may leave the console in an unusable state, but
    may
    # provide a better stack trace in the core dump to aid in
    debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort
    sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode
    switching
    # sequences. This allows clients to receive these key events.
    #DontZoom

    EndSection

    # ************************************************** ********************
    # Input devices
    # ************************************************** ********************

    # ************************************************** ********************
    # Keyboard section
    # ************************************************** ********************

    Section "Keyboard"

    Protocol "Standard"

    # when using XQUEUE, comment out the above line, and uncomment the
    # following line
    #Protocol "Xqueue"

    AutoRepeat 500 5

    # Let the server do the NumLock processing. This should only be
    # required when using pre-R6 clients
    #ServerNumLock

    # Specify which keyboard LEDs can be user-controlled (eg, with
    xset(1))
    #Xleds 1 2 3

    #To set the LeftAlt to Meta, RightAlt key to ModeShift,
    #RightCtl key to Compose, and ScrollLock key to ModeLock:

    LeftAlt Meta
    RightAlt Meta
    ScrollLock Compose
    RightCtl Control

    # To disable the XKEYBOARD extension, uncomment XkbDisable.

    # XkbDisable

    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # XkbModel "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # XkbModel "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # XkbLayout "de"
    # or:
    # XkbLayout "de"
    # XkbVariant "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # XkbOptions "ctrl:swapcaps"

    # These are the default XKB settings for XFree86
    # XkbRules "xfree86"
    # XkbModel "pc101"
    # XkbLayout "us"
    # XkbVariant ""
    # XkbOptions ""

    XkbKeycodes "xfree86"
    XkbTypes "default"
    XkbCompat "default"
    XkbSymbols "us(pc101)"
    XkbGeometry "pc"
    XkbRules "xfree86"
    XkbModel "pc101"
    XkbLayout "us"
    EndSection

    # ************************************************** ********************
    # Pointer section
    # ************************************************** ********************

    Section "Pointer"
    Protocol "PS/2"
    Device "/dev/mouse"
    ZAxisMapping 4 5

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Protocol "Xqueue"

    # Baudrate and SampleRate are only for some Logitech mice

    # BaudRate 9600
    # SampleRate 150

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    # Emulate3Buttons
    # Emulate3Timeout 50

    # ChordMiddle is an option for some 3-button Logitech mice

    # ChordMiddle

    EndSection


    # ************************************************** ********************
    # Monitor section
    # ************************************************** ********************

    # Any number of monitor sections may be present

    Section "Monitor"

    Identifier "NEC MultiSync XV15+"
    VendorName "Unknown"
    ModelName "Unknown"

    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync 31.0-65.0

    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 55.0-100.0

    # Modes can be specified in two formats. A compact one-line format,
    or
    # a multi-line format.

    # These two are equivalent

    # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817
    Interlace

    # Mode "1024x768i"
    # DotClock 45
    # HTimings 1024 1048 1208 1264
    # VTimings 768 776 784 817
    # Flags "Interlace"
    # EndMode

    # This is a set of standard mode timings. Modes that are out of
    monitor spec
    # are automatically deleted by the server (provided the HorizSync and
    # VertRefresh lines are correct), so there's no immediate need to
    # delete mode timings (unless particular mode timings don't work on
    your
    # monitor). With these modes, the best standard mode that your monitor
    # and video card can support for a given resolution is automatically
    # used.

    # 512x384 78 Hz, 31.50 kHz hsync
    Modeline "512x384" 20.160 512 528 592 640 384 385 388 404
    -HSync -VSync
    # 512x384 85 Hz, 34.38 kHz hsync
    Modeline "512x384" 22 512 528 592 640 384 385 388 404
    -HSync -VSync

    # 640x400 70 Hz, 31.5 kHz hsync
    Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
    # 640x400 85 Hz, 37.86 kHz hsync
    Modeline "640x400" 31.5 640 672 736 832 400 401 404 445
    -HSync +VSync

    # 640x480 100 Hz, 53.01 kHz hsync
    Modeline "640x480" 45.8 640 672 768 864 480 488 494 530
    -HSync -VSync
    # 640x480 60 Hz, 31.5 kHz hsync
    Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
    # 640x480 72 Hz, 36.5 kHz hsync
    Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
    # 640x480 75 Hz, 37.50 kHz hsync
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500
    -HSync -VSync
    # 640x480 85 Hz, 43.27 kHz hsync

    Modeline "640x480" 36 640 696 752 832 480 481 484 509
    -HSync -VSync
    # 800x600 100 Hz, 64.02 kHz hsync
    Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640
    -HSync -VSync
    # 800x600 56 Hz, 35.15 kHz hsync
    ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
    # 800x600 60 Hz, 37.8 kHz hsync
    Modeline "800x600" 40 800 840 968 1056 600 601 605 628
    +hsync +vsync
    # 800x600 72 Hz, 48.0 kHz hsync
    Modeline "800x600" 50 800 856 976 1040 600 637 643 666
    +hsync +vsync
    # 800x600 85 Hz, 55.84 kHz hsync
    Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657
    -HSync -VSync

    # 1024x480 for certain Vaios
    Modeline "1024x480" 65 1024 1032 1176 1344 480 491 493 525 -HSync
    -VSync

    # 1024x768 100Hz, 80.21 kHz hsync
    Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802
    -HSync -VSync
    # 1024x768 60 Hz, 48.4 kHz hsync
    Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806
    -hsync -vsync
    # 1024x768 70 Hz, 56.5 kHz hsync
    Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806
    -hsync -vsync
    # 1024x768 76 Hz, 62.5 kHz hsync
    Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
    # 1024x768 85 Hz, 70.24 kHz hsync
    Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822
    -HSync -VSync

    # 1152x864 100 Hz, 89.62 kHz hsync
    Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902
    -HSync -VSync
    # 1152x864 60 Hz, 53.5 kHz hsync
    Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892
    -HSync -VSync
    # 1152x864 70 Hz, 62.4 kHz hsync
    Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
    # 1152x864 78 Hz, 70.8 kHz hsync
    Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
    # 1152x864 84 Hz, 76.0 kHz hsync
    Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908

    # 1280x960 60 HzModeline "1280x960" 108 1280 1376 1488 1800 960
    961 964 1000 +HSync +VSync
    # 1280x960 85 HzModeline "1280x960" 148.5 1280 1344 1504 1728 960
    961 964 1011 +HSync +VSync

    # 1280x1024 100 Hz, 107.16 kHz hsync
    Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072
    -HSync -VSync
    # 1280x1024 61 Hz, 64.2 kHz hsync
    Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
    # 1280x1024 70 Hz, 74.59 kHz hsync
    Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068
    -HSync -VSync
    # 1280x1024 74 Hz, 78.85 kHz hsync
    Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
    # 1280x1024 76 Hz, 81.13 kHz hsync
    Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
    # 1280x1024 85 Hz, 91.15 kHz hsync
    Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072
    +HSync +VSync

    # 1400x1050 60Hz, 65.8 kHz hsync
    Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100
    +HSync +VSync
    # 1400x1050 70Hz, 76.8 kHz hsync
    Modeline "1400x1050" 151 1400 1464 1656 1960 1050 1051 1054 1100
    +HSync +VSync
    # 1400x1050 75Hz, 82.3 kHz hsync
    Modeline "1400x1050" 162 1400 1464 1656 1960 1050 1051 1054 1100
    +HSync +VSync
    # 1400x1050 85Hz, 93.2 kHz hsync
    Modeline "1400x1050" 184 1400 1464 1656 1960 1050 1051 1054 1100
    +HSync +VSync

    # 1600x1200 60Hz, 75.00 kHz hsync
    Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250
    +HSync +VSync
    # 1600x1200 70 Hz, 87.50 kHz hsync
    Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250
    -HSync -VSync
    # 1600x1200 75 Hz, 93.75 kHz hsync
    Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250
    +HSync +VSync
    # 1600x1200 85 Hz, 105.77 kHz hsync
    Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244
    +HSync +VSync

    # 1800x1440 64Hz, 96.15 kHz hsync
    ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490
    +HSync +VSync
    # 1800x1440 70Hz, 104.52 kHz hsync
    ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490
    +HSync +VSync

    # Low-res Doublescan modes
    # If your chipset does not support doublescan, you get a 'squashed'
    # resolution like 320x400.

    # 320x200 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
    Modeline "320x200" 12.588 320 336 384 400 200 204 205 225
    Doublescan
    # 320x240 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
    Modeline "320x240" 12.588 320 336 384 400 240 245 246 262
    Doublescan
    # 320x240 72 Hz, 36.5 kHz hsync
    Modeline "320x240" 15.750 320 336 384 400 240 244 246 262
    Doublescan
    # 400x300 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
    ModeLine "400x300" 18 400 416 448 512 300 301 302 312
    Doublescan
    # 400x300 60 Hz, 37.8 kHz hsync
    Modeline "400x300" 20 400 416 480 528 300 301 303 314
    Doublescan
    # 400x300 72 Hz, 48.0 kHz hsync
    Modeline "400x300" 25 400 424 488 520 300 319 322 333
    Doublescan
    # 480x300 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
    ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312
    Doublescan
    # 480x300 60 Hz, 37.8 kHz hsync
    Modeline "480x300" 23.890 480 496 576 632 300 301 303 314
    Doublescan
    # 480x300 63 Hz, 39.6 kHz hsync
    Modeline "480x300" 25 480 496 576 632 300 301 303 314
    Doublescan
    # 480x300 72 Hz, 48.0 kHz hsync
    Modeline "480x300" 29.952 480 504 584 624 300 319 322 333
    Doublescan

    EndSection


    # ************************************************** ********************
    # Graphics device section
    # ************************************************** ********************

    # Any number of graphics device sections may be present

    Section "Device"
    Identifier "Generic VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    Chipset "generic"

    # VideoRam 256

    # Clocks 25.2 28.3

    EndSection

    # Device configured by Xconfigurator:

    Section "Device"
    Identifier "My Video Card"
    VendorName "Unknown"
    BoardName "Unknown"
    #VideoRam 65536
    # Insert Clocks lines here if appropriate
    EndSection


    # ************************************************** ********************
    # Screen sections
    # ************************************************** ********************

    # The Colour SVGA server

    Section "Screen"
    Driver "svga"
    # Use Device "Generic VGA" for Standard VGA 320x200x256
    #Device "Generic VGA"
    Device "My Video Card"
    Monitor "NEC MultiSync XV15+"
    DefaultColorDepth 16
    Subsection "Display"
    Depth 16
    Modes "1024x768" "800x600"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1024x768" "800x600"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 32
    Modes "1024x768" "800x600"
    ViewPort 0 0
    EndSubsection
    EndSection

    # The 16-color VGA server

    Section "Screen"
    Driver "vga16"
    Device "Generic VGA"
    Monitor "NEC MultiSync XV15+"
    Subsection "Display"
    Modes "640x480" "800x600"
    ViewPort 0 0
    EndSubsection
    EndSection

    # The Mono server

    Section "Screen"
    Driver "vga2"
    Device "Generic VGA"
    Monitor "NEC MultiSync XV15+"
    Subsection "Display"
    Modes "640x480" "800x600"
    ViewPort 0 0
    EndSubsection
    EndSection

    # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32,
    Mach64
    # I128, and S3V)
    Section "Screen"
    Driver "accel"
    Device "My Video Card"
    Monitor "NEC MultiSync XV15+"
    DefaultColorDepth 16
    Subsection "Display"
    Depth 16
    Modes "1024x768" "800x600"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1024x768" "800x600"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 32
    Modes "1024x768" "800x600"
    ViewPort 0 0
    EndSubsection
    EndSection
    linuxquestion@yahoo.com Guest

  4. #4

    Default Re: Installing ATI Radeon video drivers on Redhat Advanced Server

    Here is the file: XF86Config-4


    ---------------

    # XFree86 4.0 configuration generated by Xconfigurator

    Section "ServerLayout"
    Identifier "XFree86 Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection

    # By default, Red Hat Linux 6.0 and later use xfs

    Section "Files"
    FontPath "unix/:7100"
    EndSection

    # Module loading section

    Section "Module"
    Load "dbe" # Double-buffering
    Load "GLcore" # OpenGL support
    Load "dri" # Direct rendering infrastructure
    Load "glx" # OpenGL X protocol interface
    Load "extmod" # Misc. required extensions
    Load "v4l" # Video4Linux
    # Load "pex5" # PHIGS for X 3D environment (obsolete)
    # Load "record" # X event recorder
    # Load "xie" # X Image Extension (obsolete)
    # You only need the following two modules if you do not use xfs.
    # Load "freetype" # TrueType font handler
    # Load "type1" # Adobe Type 1 font handler
    EndSection

    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "XkbLayout" "us"
    EndSection

    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Device" "/dev/mouse"
    Option "Protocol" "PS/2"
    Option "Emulate3Buttons" "off"
    Option "ZAxisMapping" "4 5"
    EndSection

    Section "Monitor"
    Identifier "NEC MultiSync XV15+"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 31.0-65.0
    VertRefresh 55.0-100.0
    Option "dpms"
    EndSection

    Section "Device"
    Identifier "My Video Card"
    Driver "radeon"
    BoardName "Unknown"
    EndSection

    Section "Device"
    Identifier "Linux Frame Buffer"
    Driver "fbdev"
    BoardName "Unknown"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "My Video Card"
    Monitor "NEC MultiSync XV15+"
    DefaultDepth 16
    Subsection "Display"
    Depth 24
    Modes "1024x768" "800x600"
    EndSubSection
    Subsection "Display"
    Depth 16
    Modes "1024x768" "800x600"
    EndSubSection
    EndSection

    Section "DRI"
    Mode 0666
    EndSection
    linuxquestion@yahoo.com Guest

Similar Threads

  1. Replies: 7
    Last Post: April 16th, 06:30 AM
  2. Installing Print Drivers
    By James Legan in forum Windows Server
    Replies: 0
    Last Post: June 10th, 05:56 PM
  3. Using Suse packages in Redhat Advanced server
    By linuxquestion@yahoo.com in forum Linux Setup, Configuration & Administration
    Replies: 9
    Last Post: January 10th, 04:20 AM
  4. Lockup with DRI and Radeon video
    By Dirk in forum Linux Setup, Configuration & Administration
    Replies: 2
    Last Post: July 11th, 11:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139