Hello,

I'm trying to get the joystick to work. The module ns558 won't install
and give me the following error.

/lib/modules/2.4.18-14/kernel/drivers/char/joystick/ns558.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.18-14/kernel/drivers/char/joystick/ns558.o: insmod
/lib/modules/2.4.18-14/kernel/drivers/char/joystick/ns558.o failed
/lib/modules/2.4.18-14/kernel/drivers/char/joystick/ns558.o: insmod
ns558 failed
modprobe: pre-install joydev failed
modprobe: insmod joydev failed

I've tried mapping the Joystick in the BIOS to both 0x201 and 0x209, but
that did not help.

Any ideas what to try next? I'm also planning to use the joystick port
ot monitor some discrete (and also power the logic). Any suggestions.
Maybe I should write my own module?

Thanks
Jason

incase this helps..sr_mod 18136 0 (autoclean)
i810_audio 25224 0 (autoclean)
ac97_codec 13384 0 (autoclean) [i810_audio]
soundcore 6532 2 (autoclean) [i810_audio]
xsvc 27592 2 (autoclean)
binfmt_misc 7524 1
ics610 20960 0 (unused)
Pci9050 18336 0 (unused)
nfsd 79920 8 (autoclean)
lockd 58064 1 (autoclean) [nfsd]
sunrpc 79324 1 (autoclean) [nfsd lockd]
autofs 13348 0 (autoclean) (unused)
eepro100 22264 1
iptable_filter 2412 0 (autoclean) (unused)
ip_tables 14936 1 [iptable_filter]
microcode 4668 0 (autoclean)
ide-scsi 10512 0
ide-cd 33608 0
cdrom 33696 0 [sr_mod ide-cd]
mousedev 5524 0 (unused)
keybdev 2976 0 (unused)
hid 22244 0 (unused)
input 5888 0 [mousedev keybdev hid]
usb-uhci 26188 0 (unused)
ehci-hcd 17480 0 (unused)
usbcore 77024 1 [hid usb-uhci ehci-hcd]
ext3 70368 3
jbd 52212 3 [ext3]
3w-x 33216 4
sd_mod 13552 8
scsi_mod 107144 4 [sr_mod ide-scsi 3w-x sd_mod]