I installed a D-Link wireless PCI card and when I logged into RH8 I get
no sounds. I am using es1371 modules for a Soundblaster PCI128 card. I
don't care about getting the wireless card to work as it works under XP.
I have confirmed the soundserver is started. My modules.conf is as
follows:
> alias parport_lowlevel parport_pc
> alias eth0 8139too
> ### alias sound-slot-0 via82c_audio
> ##post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
> ##pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
> alias sound-slot-0 es1371
> post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
> pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
> alias usb-controller usb-uhci
> alias char-major-195 nvidia
My system log messages give the following error:
> Jul 20 12:19:33 localhost modprobe: modprobe: Can't locate module sound-slot-0
> Jul 20 12:19:34 localhost modprobe: modprobe: Can't locate module sound-service-0-0
> Jul 20 12:19:34 localhost modprobe: modprobe: Can't locate module sound-slot-0
> Jul 20 12:19:34 localhost modprobe: modprobe: Can't locate module sound-service-0-0
> Jul 20 12:19:34 localhost kernel: es1371: version v0.30 time 12:24:20 Sep 4 2002
> Jul 20 12:19:34 localhost kernel: PCI: Found IRQ 9 for device 00:0b.0
> Jul 20 12:19:34 localhost kernel: PCI: Sharing IRQ 9 with 00:07.5
> Jul 20 12:19:34 localhost kernel: es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
> Jul 20 12:19:34 localhost kernel: es1371: found es1371 rev 2 at io 0xdc00 irq 9
> Jul 20 12:19:34 localhost kernel: es1371: features: joystick 0x0
> Jul 20 12:19:34 localhost kernel: ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
> Jul 20 12:19:34 localhost modprobe: modprobe: Can't locate module sound-service-1-0
> Jul 20 12:19:45 localhost last message repeated 3 times
Any help in diagnosing this would be appreciated. Could it be the
wireless card is trying to use IRQ 9?