Hello.

First, I have a question about correct TAP interface bringing up. How I must
do it?
Some people recommend do it like this:
dd if=/dev/null of=/dev/tap0 bs=1500 count=1
dd if=/dev/null of=/dev/tap1 bs=1500 count=1
dd if=/dev/null of=/dev/tap2 bs=1500 count=1

All ok, but I think it's not correct. So, how?

Second question I'd have is how I can join it into bridge group?
Some hand-passes like
sysctl -w net.link.ether.bridge_cfg=fxp0:1,tap0:1,tap1:1,tap 2:1
sysctl -w net.link.ether.bridge=1
is work, in this case IP traffic through bridge group successfully but
Ethernet frames not.

As a result of this I want have more than one ng pppoed at one physical
interface. I think that:
/usr/libexec/pppoed -a Hub0 -l hub0 tap0
/usr/libexec/pppoed -a Hub1 -l hub1 tap1
/usr/libexec/pppoed -a Hub2 -l hub2 tap2
will work.

Maybe I think wrong? Anybody have some solution for me?

Thanks.

PS: sorry for my english.
--
Sergey Evteeff mailto:ostapmail.radiant.ru