Professional Web Applications Themes

Promise PDC20267 UDMA100 controller channel attaching trouble - FreeBSD

I've having a bit of trouble with my promise ATA100 controller card on my server computer. I used to use it fine with my older system (k6-450 with freebsd 4.xx). I've built this newer box (with FreeBSD 5.3 and also 5.3-STABLE, running a K7-650 now) and swapped a lot of things over. The problem is I keep getting this: device_attach: ata2 attach returned 6 when I boot up. I've juggled IRQs, turned off the onboard controller, but it just won't attach. The only way it'll work is if I run the drives on the secondary port. When I do this, ...

  1. #1

    Default Promise PDC20267 UDMA100 controller channel attaching trouble

    I've having a bit of trouble with my promise ATA100 controller card on
    my server computer. I used to use it fine with my older system (k6-450
    with freebsd 4.xx). I've built this newer box (with FreeBSD 5.3 and
    also 5.3-STABLE, running a K7-650 now) and swapped a lot of things
    over. The problem is I keep getting this:

    device_attach: ata2 attach returned 6

    when I boot up. I've juggled IRQs, turned off the onboard controller,
    but it just won't attach. The only way it'll work is if I run the
    drives on the secondary port. When I do this, everything boots. When
    the drives are on the primary port, it won't even acknowledge I have any
    drives hooked up.

    The card's bios detects all drives upon bootup (primary/secondary), so I
    don't think the controller is messed..

    atacontrol list:

    ATA channel 0:
    Master: ad0 <Maxtor 53073H6/DAC10SC0> ATA/ATAPI revision 6
    Slave: no device present
    ATA channel 1:
    Master: acd0 <HITACHI CDR-8430/0024> ATA/ATAPI revision 0
    Slave: ast0 <Seagate STT20000A/8N43> ATA/ATAPI revision 0
    ATA channel 3:
    Master: ad6 <WDC WD1200JB-00GVA0/08.02D08> ATA/ATAPI revision 6
    Slave: ad7 <QUANTUM FIREBALLP AS40.0/A1Y.1500> ATA/ATAPI revision 5

    dmesg

    Copyright (c) 1992-2005 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
    FreeBSD 5.3-STABLE #3: Sun Feb 20 19:31:02 EST 2005
    [email]roothive.wg.loca[/email]l:/usr/obj/usr/src/sys/HIVE
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: AMD Athlon(tm) Processor (656.47-MHz 686-class CPU)
    Origin = "AuthenticAMD" Id = 0x642 Stepping = 2

    Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE, CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
    AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
    real memory = 402587648 (383 MB)
    avail memory = 388460544 (370 MB)
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <AMIINT > on motherboard
    acpi0: Power Button (fixed)
    acpi0: Sleep Button (fixed)
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
    cpu0: <ACPI CPU> on acpi0
    acpi_button0: <Power Button> on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pci0: <ACPI PCI bus> on pcib0
    agp0: <AMD 751 host to AGP bridge> port 0xd000-0xd003 mem
    0xeedff000-0xeedfffff,0xec000000-0xedffffff at device 0.0 on pci0
    pcib1: <PCI-PCI bridge> at device 1.0 on pci0
    pci1: <PCI bus> on pcib1
    pci1: <display, VGA> at device 5.0 (no driver attached)
    isab0: <PCI-ISA bridge> at device 7.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <AMD 756 UDMA66 controller> port
    0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
    ata0: channel #0 on atapci0
    ata1: channel #1 on atapci0
    pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
    ohci0: <AMD-756 USB Controller> mem 0xeffaf000-0xeffaffff irq 10 at
    device 7.4 on pci0
    usb0: OHCI version 1.0, legacy support
    usb0: <AMD-756 USB Controller> on ohci0
    usb0: USB revision 1.0
    uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 4 ports with 4 removable, self powered
    xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xd200-0xd23f irq 11 at
    device 9.0 on pci0
    miibus0: <MII bus> on xl0
    nsphy0: <DP83840 10/100 media interface> on miibus0
    nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    xl0: Ethernet address: 00:60:08:bd:eb:7e
    xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xd400-0xd43f irq 12 at
    device 10.0 on pci0
    miibus1: <MII bus> on xl1
    nsphy1: <DP83840 10/100 media interface> on miibus1
    nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    xl1: Ethernet address: 00:60:08:bd:eb:bd
    atapci1: <Promise PDC20267 UDMA100 controller> port
    0xd600-0xd63f,0xd800-0xd803,0xda00-0xda07,0xdc00-0xdc03,0xde00-0xde07
    mem 0xeffe0000-0xefffffff irq 10 at device 11.0 on pci0
    ata2: channel #0 on atapci1
    device_attach: ata2 attach returned 6
    ata3: channel #1 on atapci1
    acpi_tz0: <Thermal Zone> on acpi0
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6
    drq 2 on acpi0
    sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
    acpi0
    sio0: type 16550A
    sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
    sio1: type 16550A
    ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq
    3 on acpi0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/9 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    orm0: <ISA Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xcbfff on isa0
    pmtimer0 on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Timecounter "TSC" frequency 656465381 Hz quality 800
    Timecounters tick every 10.000 msec
    ipfw2 initialized, divert enabled, rule-based forwarding disabled,
    default to deny, logging disabled
    ad0: 29311MB <Maxtor 53073H6/DAC10SC0> [59554/16/63] at ata0-master UDMA66
    ata1-slave: FAILURE - SETFEATURES SET TRANSFER MODE status=1<ERROR>
    error=4<ABORTED>
    acd0: CDROM <HITACHI CDR-8430/0024> at ata1-master PIO4
    ast0: TAPE <Seagate STT20000A/8N43> at ata1-slave BIOSPIO
    ad6: 114473MB <WDC WD1200JB-00GVA0/08.02D08> [232581/16/63] at
    ata3-master UDMA100
    ad7: 38172MB <QUANTUM FIREBALLP AS40.0/A1Y.1500> [77557/16/63] at
    ata3-slave UDMA100
    Mounting root from ufs:/dev/ad6s1a


    --
    No virus found in this outgoing message.
    Checked by AVG Anti-Virus.
    Version: 7.0.300 / Virus Database: 266.1.0 - Release Date: 2/18/2005

    doug reynolds Guest

  2. #2

    Default Promise PDC20267 UDMA100 controller channel attaching trouble

    I've having a bit of trouble with my promise ATA100 controller card on
    my server computer. I used to use it fine with my older system (k6-450
    with freebsd 4.xx). I've built this newer box (with FreeBSD 5.3 and
    also 5.3-STABLE, running a K7-650 now) and swapped a lot of things
    over. The problem is I keep getting this:

    device_attach: ata2 attach returned 6

    when I boot up. I've juggled IRQs, turned off the onboard controller,
    but it just won't attach. The only way it'll work is if I run the
    drives on the secondary port. When I do this, everything boots. When
    the drives are on the primary port, it won't even acknowledge I have any
    drives hooked up.

    The card's bios detects all drives upon bootup (primary/secondary), so I
    don't think the controller is messed..

    atacontrol list:

    ATA channel 0:
    Master: ad0 <Maxtor 53073H6/DAC10SC0> ATA/ATAPI revision 6
    Slave: no device present
    ATA channel 1:
    Master: acd0 <HITACHI CDR-8430/0024> ATA/ATAPI revision 0
    Slave: ast0 <Seagate STT20000A/8N43> ATA/ATAPI revision 0
    ATA channel 3:
    Master: ad6 <WDC WD1200JB-00GVA0/08.02D08> ATA/ATAPI revision 6
    Slave: ad7 <QUANTUM FIREBALLP AS40.0/A1Y.1500> ATA/ATAPI revision 5

    dmesg

    Copyright (c) 1992-2005 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
    FreeBSD 5.3-STABLE #3: Sun Feb 20 19:31:02 EST 2005
    [email]roothive.wg.loca[/email]l:/usr/obj/usr/src/sys/HIVE
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: AMD Athlon(tm) Processor (656.47-MHz 686-class CPU)
    Origin = "AuthenticAMD" Id = 0x642 Stepping = 2

    Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE, CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
    AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
    real memory = 402587648 (383 MB)
    avail memory = 388460544 (370 MB)
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <AMIINT > on motherboard
    acpi0: Power Button (fixed)
    acpi0: Sleep Button (fixed)
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
    cpu0: <ACPI CPU> on acpi0
    acpi_button0: <Power Button> on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pci0: <ACPI PCI bus> on pcib0
    agp0: <AMD 751 host to AGP bridge> port 0xd000-0xd003 mem
    0xeedff000-0xeedfffff,0xec000000-0xedffffff at device 0.0 on pci0
    pcib1: <PCI-PCI bridge> at device 1.0 on pci0
    pci1: <PCI bus> on pcib1
    pci1: <display, VGA> at device 5.0 (no driver attached)
    isab0: <PCI-ISA bridge> at device 7.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <AMD 756 UDMA66 controller> port
    0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
    ata0: channel #0 on atapci0
    ata1: channel #1 on atapci0
    pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
    ohci0: <AMD-756 USB Controller> mem 0xeffaf000-0xeffaffff irq 10 at
    device 7.4 on pci0
    usb0: OHCI version 1.0, legacy support
    usb0: <AMD-756 USB Controller> on ohci0
    usb0: USB revision 1.0
    uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 4 ports with 4 removable, self powered
    xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xd200-0xd23f irq 11 at
    device 9.0 on pci0
    miibus0: <MII bus> on xl0
    nsphy0: <DP83840 10/100 media interface> on miibus0
    nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    xl0: Ethernet address: 00:60:08:bd:eb:7e
    xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xd400-0xd43f irq 12 at
    device 10.0 on pci0
    miibus1: <MII bus> on xl1
    nsphy1: <DP83840 10/100 media interface> on miibus1
    nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    xl1: Ethernet address: 00:60:08:bd:eb:bd
    atapci1: <Promise PDC20267 UDMA100 controller> port
    0xd600-0xd63f,0xd800-0xd803,0xda00-0xda07,0xdc00-0xdc03,0xde00-0xde07
    mem 0xeffe0000-0xefffffff irq 10 at device 11.0 on pci0
    ata2: channel #0 on atapci1
    device_attach: ata2 attach returned 6
    ata3: channel #1 on atapci1
    acpi_tz0: <Thermal Zone> on acpi0
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6
    drq 2 on acpi0
    sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
    acpi0
    sio0: type 16550A
    sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
    sio1: type 16550A
    ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq
    3 on acpi0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/9 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    orm0: <ISA Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xcbfff on isa0
    pmtimer0 on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Timecounter "TSC" frequency 656465381 Hz quality 800
    Timecounters tick every 10.000 msec
    ipfw2 initialized, divert enabled, rule-based forwarding disabled,
    default to deny, logging disabled
    ad0: 29311MB <Maxtor 53073H6/DAC10SC0> [59554/16/63] at ata0-master UDMA66
    ata1-slave: FAILURE - SETFEATURES SET TRANSFER MODE status=1<ERROR>
    error=4<ABORTED>
    acd0: CDROM <HITACHI CDR-8430/0024> at ata1-master PIO4
    ast0: TAPE <Seagate STT20000A/8N43> at ata1-slave BIOSPIO
    ad6: 114473MB <WDC WD1200JB-00GVA0/08.02D08> [232581/16/63] at
    ata3-master UDMA100
    ad7: 38172MB <QUANTUM FIREBALLP AS40.0/A1Y.1500> [77557/16/63] at
    ata3-slave UDMA100
    Mounting root from ufs:/dev/ad6s1a



    --
    No virus found in this outgoing message.
    Checked by AVG Anti-Virus.
    Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2/22/2005

    doug reynolds Guest

Similar Threads

  1. Trouble Accessing Active Directory Domain Controller
    By webbertsolutions@newsgroups.nospam in forum ASP.NET Security
    Replies: 3
    Last Post: March 22nd, 05:58 AM
  2. Promise SATA150 TX2plus
    By Miquel van Smoorenburg in forum Debian
    Replies: 0
    Last Post: July 2nd, 08:00 PM
  3. Q: Trouble with SCSI controller
    By sabaehr@web.de in forum Linux Setup, Configuration & Administration
    Replies: 0
    Last Post: July 2nd, 07:14 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139