Hi all,

when I plug in the aiptek and the ricoh together I cannot communicate
with the ricoh with gthumb.

gthumb --import-photos starts automatically but shows the wrong device "AEG Snap 300".
When connecting the ricoh alone, gthumb shows "USB PTP Class Camera" and
everything works fine.

I have then removed every entry in /etc/hotplug/usb/libgphoto2.usermap
but the one for the ricoh:

# Ricoh Caplio R2
libgphoto2 0x0003 0x05ca 0x032c 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00
0x00 0x00000000

hoping that this would prevent detecting the aiptek pencam. But it didn't
help.

1) syslog when Aiptek is plugged in:
Mar 4 19:35:06 localhost kernel: [4304706.185000] drivers/usb/media/stv680.c: [usb_stv680_remove_disconnected:1448] STV(i): STV0680 disconnected
Mar 4 19:43:00 localhost kernel: [4305179.849000] usb 1-1: new full speed USB device using uhci_hcd and address 62
Mar 4 19:43:01 localhost kernel: [4305181.320000] drivers/usb/media/stv680.c: [stv680_probe:1377] STV(i): STV0680 camera found.
Mar 4 19:43:01 localhost kernel: [4305181.324000] drivers/usb/media/stv680.c: [stv680_probe:1415] STV(i): registered new video device: video1
Mar 4 19:43:01 localhost kernel: [4305181.324000] usbcore: registered new driver stv680
Mar 4 19:43:01 localhost kernel: [4305181.324000] drivers/usb/media/stv680.c: [usb_stv680_init:1493] STV(i): usb camera driver version v0.25 registering
Mar 4 19:43:01 localhost kernel: [4305181.324000] drivers/usb/media/stv680.c: STV0680 USB Camera Driver v0.25
Mar 4 19:43:01 localhost usb.agent[22879]: stv680: loaded successfully

2) now the Ricoh will be plugged in:
Mar 4 19:44:45 localhost kernel: [4305285.348000] usb 1-2: new full speed USB device using uhci_hcd and address 63
Mar 4 19:44:46 localhost kernel: [4305285.943000] usb 1-2: configuration #1 chosen from 2 choices
Mar 4 19:44:46 localhost usb.agent[23002]: Keeping default configuration with /sys//devices/pci0000:00/0000:00:1f.2/usb1/1-2
Mar 4 19:44:50 localhost kernel: [4305290.432000] usb 1-2: USB disconnect, address 63
Mar 4 19:44:53 localhost kernel: [4305292.848000] usb 1-2: new full speed
USB device using uhci_hcd and address 64
Mar 4 19:44:54 localhost usb.agent[23086]: libgphoto2: loaded successfully

lsusb:
Bus 005 Device 004: ID 0dda:2005 Integrated Circuit Solution, Inc.
Bus 005 Device 003: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 059: ID 05ca:032c Ricoh Co., Ltd
Bus 001 Device 057: ID 0553:0202 STMicroelectronics Imaging Division (VLSI Vision) Aiptek PenCam 1
Bus 001 Device 001: ID 0000:0000

Can anyone give me a hint?

Thanks
Guenter