Forum: SCO

Hello. I have a Compaq Proliant ML350 Server. I have instaled SCO Unix 5.04 and I wants install a PCI card with two serial port, but when I...

Hi, I had performed a full backup of my Unix system on a Tape Disk through the cpio utility. It had taken 3 tapes to perform the backup. Recently I...

Hi We have a UW 7.1 box, on the system log there are lots of messages about dhpc, can some one tell me how to swich off dhcp please There is...

Hi all, I have a SCO5.0.5 PC with a SCSI2 tape drive and an Adaptec alad controller. But there's no /dev/rct0n device. I require this device for...

In article <pan.2003.08.24.01.43.56.251633@mtco.com>, Nucleon <tcfelker@mtco.com> wrote: It dies in InterNAP from what my traceroute tells me. ...

Hello, time ago our sco-server (release 5) where crashed. After it is back again, it seems everythink works fine. Now i want add a new user, but...

Hi all, After some searches on google, it seems that the value for NBUF in these systems is limited to around 450MB. If the above is...

Without installation diskettes, but with 'boot' and 'root filesystem' (created from existing SCO ODT 3.0 before removed), trying to get access to...

A hacker brought SCO's webpages down, stories here: http://www.theinquirer.net/?article=11190 ...

Mark R wrote: That would be the easiest way. You could add 4377 MB filesystems on partition 2 and 3 (i.e. /dev/rdsk/c0b0t0dopx) and mount on...

Joe Burns typed (on Mon, Aug 11, 2003 at 09:43:38PM -0400): | I am trying to create a "tar" output file of the "/usr2" filesystem into a | storage...

I was curious to see that SCO claimed a large company had purchased SCO licences for Linux installations. SCO refused to reveal the name but...

I'm looking at a SCO 5.06 server with a network printer which is performing really really slowly. The print jobs don't begin to print for several...

In Unixware 7.X, the net driver name is /dev/netX (just use the ifconfig -a to see). Then we could use the ioctl and MACIOC_GETADDR to get the...

I want to send a FormFeed after every output to a printer connected to a Netgear PS110 printserver. I have implemented the filter mentioned in TA...

"SCO Announces Winners of Longest Running Server Competition at Annual Customer Conference "Eckerd and Zenez Recognized by SCO for Longest...

i'm having PII 350Mhz, i810 Chipset motherboard and D-Link 56kbps Modem connected thru /dev/tty2A. (my modem cant use 'wait for dialtone' option.)...

Check out this link: http://www.perens.org/Articles/SCOCopiedCode.html The code shown at the SCO Forum was published in Kernighan & Ritchie's The...

SCO's specious attack on Linux and Open Source suggests a counter strategy. Never buy another SCO product. Never do business with any company...

W2K (A) ---------> LINUX GATEWAY (C) --------> The world OSR5 (B) --------->X From the illustration above, (A) I could do both "ping" and...