We have a 2003 Enterprise File Server and I'm trying to enable shadow
copy on the shares.

I can see that the shadow copies do get created as the size grows on
the volume specified and VSSAdmin also suggests that these shadow
copies are there on the volume. However the previous versions tab
never has anything listed. To confirm - I am making changes to files
before checking the tab.

Latest Shadow Copy Client (Dated Sept03) installed on Server and
clients (WindowsXP SP1);

A netmon trace gives the error at the bottom of this post. Have
installed the latest shadow copy hotfix from KB833167 but no change. I
have seen a couple of posts on google groups suggesting there is an
Insufficient Resources bug with Shadow Copy - would this be the same
do you think?

Thanks

795 41.509906 LOCAL 000C767423A3 SMB R transact2 - NT error, System,
Error, Code = (517) STATUS_INSUFF_SERVER_RESOURCES SERVERNAME x.x.x.x
IP
FRAME: Base frame properties
FRAME: Time of capture = 25/06/2004 16:29:16
FRAME: Time delta from previous physical frame: 0 microseconds
FRAME: Frame number: 795
FRAME: Total frame length: 93 bytes
FRAME: Capture frame length: 93 bytes
FRAME: Frame data: Number of data bytes remaining = 93 (0x005D)
ETHERNET: EType = Internet IP (IPv4)
ETHERNET: Destination address = 000C767423A3
ETHERNET: 0....... = Individual address
ETHERNET: .0...... = Universally administered address
ETHERNET: Source address = 000F1F6BCF77
ETHERNET: .0...... = Universally administered address
ETHERNET: Ethernet Type : 0x0800 (Internet IP (IPv4))
IP: Protocol = TCP - Transmission Control; Packet ID = 46334; Total IP
Length = 79; Options = No Options
IP: Version = IPv4; Header Length = 20
IP: 0100.... = IP Version 4
IP: ....0101 = Header Length 20
IP: Type of Service = Normal Service
IP: 000..... = Precedence - Routine
IP: ...0.... = Normal Delay
IP: ....0... = Normal Throughput
IP: .....0.. = Normal Reliability
IP: ......0. = Normal Monetary Cost
IP: Total Length = 79 (0x4F)
IP: Identification = 46334 (0xB4FE)
IP: Fragmentation Summary = 16384 (0x4000)
IP: .1.............. = Cannot fragment datagram
IP: ..0............. = Last fragment in datagram
IP: ...0000000000000 = Fragment Offset 0 (0x0000)
IP: Time to Live = 128 (0x80)
IP: Protocol = TCP - Transmission Control
IP: Checksum = 0 (0x0) (Error)
IP: Source Address = x.x.x.x
IP: Destination Address = x.x.x.x
TCP: Control Bits: .AP..., len: 39, seq: 400017061-400017100,
ack:1691905871, win:65535, src: 445 dst: 1732
TCP: Source Port = Microsoft-DS
TCP: Destination Port = 0x06C4
TCP: Sequence Number = 400017061 (0x17D7C6A5)
TCP: Acknowledgement Number = 1691905871 (0x64D86F4F)
TCP: Data Offset = 20 bytes
TCP: 0101.... = Data Offset (20 bytes)
TCP: ....0000 = Reserved bits
TCP: Flags = 0x18 : .AP...
TCP: ..0..... = No urgent data
TCP: ...1.... = Acknowledgement field significant
TCP: ....1... = Push function
TCP: .....0.. = No Reset
TCP: ......0. = No Synchronize
TCP: .......0 = Not the end of the data
TCP: Window = 65535 (0xFFFF)
TCP: Checksum = ERROR: CheckSum is 0xCF07, Should be 0xA347
TCP: Urgent Pointer = 0 (0x0)
NBT: SS: Session Message, Len: 35
NBT: Packet Type = Session Message
NBT: Packet Flags = 0 (0x0)
NBT: .......0 = Add 0 to Length
NBT: Packet Length = 35 (0x23)
NBT: SS Data: Number of data bytes remaining = 35 (0x0023)
SMB: R transact2 - NT error, System, Error, Code = (517)
STATUS_INSUFF_SERVER_RESOURCES
SMB: NT status code = 0xC0000205, Facility = System, Severity =
Error, Code = (517) STATUS_INSUFF_SERVER_RESOURCES
SMB: NT Status Severity Code = Error
SMB: NT Status Customer Code = 0 (0x0)
SMB: NT Status Reserved Bit = 0 (0x0)
SMB: NT Status Facility = System
SMB: NT Status Code System Error =
STATUS_INSUFF_SERVER_RESOURCES
SMB: Header: PID = 0x0670 TID = 0x0801 MID = 0x38C6 UID = 0x0802
SMB: Tree ID (TID) = 2049 (0x801)
SMB: Process ID (PID) = 1648 (0x670)
SMB: User ID (UID) = 2050 (0x802)
SMB: Multiplex ID (MID) = 14534 (0x38C6)
SMB: Flags Summary = 152 (0x98)
SMB: .......0 = Lock & Read and Write & Unlock not
supported
SMB: ......0. = Send No Ack not supported
SMB: ....1... = Using caseless pathnames
SMB: ...1.... = Canonicalized pathnames
SMB: ..0..... = No Opportunistic lock
SMB: .0...... = No Change Notify
SMB: 1....... = Server response
SMB: flags2 Summary = 52231 (0xCC07)
SMB: ...............1 = Understands long filenames
SMB: ..............1. = Understands extended attributes
SMB: ...0............ = No DFS namespace
SMB: ..0............. = No paging of IO
SMB: .1.............. = Using NT status codes
SMB: 1............... = Using UNICODE strings
SMB: Unknown Flag2 bits = 3076 (0xC04)
SMB: Command = C transact2
SMB: Word count = 0
SMB: Byte count = 0