I'm trying to install slak 8.1 on HP Netserver LH 4 r with Netraid 1-M
Previosly was installed RH 7.1 without problems.

Steps I performed :

1. boot from cdrom and choose kernel image Raid.S .
2. fdisk /dev/sda correctly
3. run SETUP
4. install LILO
5. reboot

After step 5 the screen display a sequence of
40 40 40 40 40 40 40 .............. and fill
the entire screen.

During rebooting I cannot see any LILO message.

Rebooting from cdrom, I'm able to mount the /dev/sda1 partition
and I can see the entire volume.

What can I do ?

Thanks in advance