sunblade 1000, solaris 8 (02/02) and recommended patches

[Ian Diddams]

Hi - got me a problem.

Sunblade 1000 - vanilla install of solaris 8 (02/02 - everything plus
OEM). Applied latest recommended patches (downloaded from sunsolve
just last week).

Box boots fine, and is avialbel on the network. Then after maybe 30
minutes or so it just dies - powers itself off!

I wondered if it was because of the "power saving stuff" so I ran
un-sysconfig and re-did the usual stuff... but I noticed it deffo
didn't ask me about power-saving options. So I have no idea of this
is what is occuring or not!

There is nothing shown in the messages file. The following was shown
on the console (well, laptop and hyperterminal session!)

ultra25 console login:
RED State Exception
CPU: 0000.0000.0000.0000
TL=0000.0000.0000.0005 TT=0000.0000.0000.0034
TPC=0000.0000.1000.6d30 TnPC=0000.0000.1000.6d34
TSTATE=0000.0091.0000.1503

TL=0000.0000.0000.0004 TT=0000.0000.0000.0034
TPC=0000.0000.1000.6d30 TnPC=0000.0000.1000.6d34
TSTATE=0000.0091.0000.1503

TL=0000.0000.0000.0003 TT=0000.0000.0000.0034
TPC=0000.0000.1000.6d30 TnPC=0000.0000.1000.6d34
TSTATE=0000.0091.0000.1503

TL=0000.0000.0000.0002 TT=0000.0000.0000.0034
TPC=0000.0000.1000.70f8 TnPC=0000.0000.1000.70fc
TSTATE=0000.0091.0000.1503

TL=0000.0000.0000.0001 TT=0000.0000.0000.0064
TPC=0000.0000.0000.0000 TnPC=0000.0000.0000.0004
TSTATE=0000.0044.0000.1602




Has anybody any ideas? The company that owns this box (I'm a
contractor) has no sun maintenenace on it (or any other sunblade 1000
come to that!) so I can't call Sun for any ideas.

cheers

Ian

[Jerry]

We had problems with 2 blade 1000 that would die intermittently - problem
wound up being the power cutout switch that gets depressed when you put on
the side panel - soldered both of them closed - no more problem.

"Ian Diddams" <didds2@excite.com> wrote in message
news:c56a0f39.0307290242.2f05ab02@posting.google.c om...

> Hi - got me a problem.
>
> Sunblade 1000 - vanilla install of solaris 8 (02/02 - everything plus
> OEM). Applied latest recommended patches (downloaded from sunsolve
> just last week).
>
> Box boots fine, and is avialbel on the network. Then after maybe 30
> minutes or so it just dies - powers itself off!
>
> I wondered if it was because of the "power saving stuff" so I ran
> un-sysconfig and re-did the usual stuff... but I noticed it deffo
> didn't ask me about power-saving options. So I have no idea of this
> is what is occuring or not!
>
> There is nothing shown in the messages file. The following was shown
> on the console (well, laptop and hyperterminal session!)
>
> ultra25 console login:
> RED State Exception
> CPU: 0000.0000.0000.0000
> TL=0000.0000.0000.0005 TT=0000.0000.0000.0034
> TPC=0000.0000.1000.6d30 TnPC=0000.0000.1000.6d34
> TSTATE=0000.0091.0000.1503
>
> TL=0000.0000.0000.0004 TT=0000.0000.0000.0034
> TPC=0000.0000.1000.6d30 TnPC=0000.0000.1000.6d34
> TSTATE=0000.0091.0000.1503
>
> TL=0000.0000.0000.0003 TT=0000.0000.0000.0034
> TPC=0000.0000.1000.6d30 TnPC=0000.0000.1000.6d34
> TSTATE=0000.0091.0000.1503
>
> TL=0000.0000.0000.0002 TT=0000.0000.0000.0034
> TPC=0000.0000.1000.70f8 TnPC=0000.0000.1000.70fc
> TSTATE=0000.0091.0000.1503
>
> TL=0000.0000.0000.0001 TT=0000.0000.0000.0064
> TPC=0000.0000.0000.0000 TnPC=0000.0000.0000.0004
> TSTATE=0000.0044.0000.1602
>
>
>
>
> Has anybody any ideas? The company that owns this box (I'm a
> contractor) has no sun maintenenace on it (or any other sunblade 1000
> come to that!) so I can't call Sun for any ideas.
>
> cheers
>
> Ian

----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
[url]http://www.newsfeed.com[/url] The #1 Newsgroup Service in the World! >100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---