Screen "Screen 1" (0) (**) | |-->Monitor "monitor" (**) | |-->Device "cirrus" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "fr" (**) XKB: layout: "fr" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" Using vt 7 (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1237 card 0000,0000 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:04:0: chip 8086,7000 card 0000,0000 rev 01 class 06,01,00 hdr 80 (II) PCI: 00:04:1: chip 8086,7010 card 0000,0000 rev 00 class 01,01,80 hdr 00 (II) PCI: 00:06:0: chip 8086,1229 card 103c,10c3 rev 05 class 02,00,00 hdr 00 (II) PCI: 00:0a:0: chip 9004,8078 card 9004,7880 rev 01 class 01,00,00 hdr 00 (II) PCI: 00:0c:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00 (II) PCI: 00:0d:0: chip 1013,00b8 card ffff,00ff rev 45 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:13:0) Cirrus Logic GD 5446 rev 69, Mem @ 0xfc000000/25, 0xfecfd000/12 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B] [1] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B] [2] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B] [3] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B] [4] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B) [5] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B) [6] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B] [7] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] [8] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B] [9] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B] [1] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B] [2] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B] [3] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B] [4] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B) [5] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B) [6] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B] [7] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] [8] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B] [9] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B] [6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B] [7] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B] [8] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B] [9] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B) [10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B) [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B] [14] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] [15] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B] [16] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Speedo (II) LoadModule: "cirrus" (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o (II) Module cirrus: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8, CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD, CL-GD5465, CL-GD7548 (II) Primary Device is: PCI 00:0d:0 (--) Assigning device section with no busID to primary device (--) Chipset CLGD5446 found (II) Loading sub module "cirrus_alpine" (II) LoadModule: "cirrus_alpine" (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o (II) Module cirrus_alpine: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B] [6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B] [7] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B] [8] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B] [9] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B) [10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B) [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B] [14] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] [15] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B] [16] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B] [6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B] [7] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B] [8] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B] [9] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B) [10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B) [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [16] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B] [17] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] [18] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B] [19] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) CIRRUS(0): initializing int10 (II) CIRRUS(0): Primary V_BIOS segment is: 0xc000 (**) CIRRUS(0): Depth 16, (--) framebuffer bpp 16 (==) CIRRUS(0): RGB weight 565 (==) CIRRUS(0): Default visual is TrueColor (==) CIRRUS(0): Using SW cursor (--) CIRRUS(0): Linear framebuffer at 0xFC000000 (--) CIRRUS(0): Using MMIO (--) CIRRUS(0): MMIO registers at 0xFECFD000 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) CIRRUS(0): I2C bus "I2C bus 1" initialized. (II) CIRRUS(0): I2C bus "I2C bus 2" initialized. (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0. (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" removed. (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0. (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" removed. (II) CIRRUS(0): Manufacturer: LNK Model: 1 Serial#: 436 (II) CIRRUS(0): Year: 1996 Week: 47 (II) CIRRUS(0): EDID Version: 2.1 (II) CIRRUS(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) CIRRUS(0): Sync: Separate Composite (II) CIRRUS(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23 (II) CIRRUS(0): Gamma: 3.00 (II) CIRRUS(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) CIRRUS(0): redX: 0.625 redY: 0.340 greenX: 0.285 greenY: 0.605 (II) CIRRUS(0): blueX: 0.150 blueY: 0.065 whiteX: 0.281 whiteY: 0.311 (II) CIRRUS(0): Supported VESA Video Modes: (II) CIRRUS(0): 720x400@70Hz (II) CIRRUS(0): 720x400@88Hz (II) CIRRUS(0): 640x480@60Hz (II) CIRRUS(0): 640x480@67Hz (II) CIRRUS(0): 640x480@72Hz (II) CIRRUS(0): 640x480@75Hz (II) CIRRUS(0): 800x600@56Hz (II) CIRRUS(0): 800x600@60Hz (II) CIRRUS(0): 800x600@72Hz (II) CIRRUS(0): 800x600@75Hz (II) CIRRUS(0): 832x624@75Hz (II) CIRRUS(0): 1024x768@87Hz (interlaced) (II) CIRRUS(0): 1024x768@60Hz (II) CIRRUS(0): 1024x768@70Hz (II) CIRRUS(0): 1024x768@75Hz (II) CIRRUS(0): Manufacturer's mask: 0 (II) CIRRUS(0): Supported Future Video Modes: (II) CIRRUS(0): #0: hsize: 640 vsize 480 refresh: 70 vid: 18993 (II) CIRRUS(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Fatal server error: Caught signal 11. Server aborting When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to org. [allowsmilie] => 1 [showsignature] => 0 [ipaddress] => [iconid] => 0 [visible] => 1 [attach] => 0 [infraction] => 0 [reportthreadid] => 0 [isusenetpost] => 1 [msgid] => <20031218121854.617c179d.nosnos94@_hateSPAM_wanadoo.fr> [ref] => [htmlstate] => on_nl2br [postusername] => Nosnos [ip] => nosnos94@_hateS [isdeleted] => 0 [usergroupid] => [membergroupids] => [displaygroupid] => [password] => [passworddate] => [email] => [styleid] => [parentemail] => [homepage] => [icq] => [aim] => [yahoo] => [msn] => [skype] => [showvbcode] => [showbirthday] => [usertitle] => [customtitle] => [joindate] => [daysprune] => [lastvisit] => [lastactivity] => [lastpost] => [lastpostid] => [posts] => [reputation] => [reputationlevelid] => [timezoneoffset] => [pmpopup] => [avatarid] => [avatarrevision] => [profilepicrevision] => [sigpicrevision] => [options] => [akvbghsfs_optionsfield] => [birthday] => [birthday_search] => [maxposts] => [startofweek] => [referrerid] => [languageid] => [emailstamp] => [threadedmode] => [autosubscribe] => [pmtotal] => [pmunread] => [salt] => [ipoints] => [infractions] => [warnings] => [infractiongroupids] => [infractiongroupid] => [adminoptions] => [profilevisits] => [friendcount] => [friendreqcount] => [vmunreadcount] => [vmmoderatedcount] => [socgroupinvitecount] => [socgroupreqcount] => [pcunreadcount] => [pcmoderatedcount] => [gmmoderatedcount] => [assetposthash] => [fbuserid] => [fbjoindate] => [fbname] => [logintype] => [fbaccesstoken] => [newrepcount] => [vbseo_likes_in] => [vbseo_likes_out] => [vbseo_likes_unread] => [temp] => [field1] => [field2] => [field3] => [field4] => [field5] => [subfolders] => [pmfolders] => [buddylist] => [ignorelist] => [signature] => [searchprefs] => [rank] => [icontitle] => [iconpath] => [avatarpath] => [hascustomavatar] => 0 [avatardateline] => [avwidth] => [avheight] => [edit_userid] => [edit_username] => [edit_dateline] => [edit_reason] => [hashistory] => [pagetext_html] => [hasimages] => [signatureparsed] => [sighasimages] => [sigpic] => [sigpicdateline] => [sigpicwidth] => [sigpicheight] => [postcount] => 3 [islastshown] => [isfirstshown] => [attachments] => [allattachments] => ) -->Screen "Screen 1" (0) > (**) | |-->Monitor "monitor" > (**) | |-->Device "cirrus" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc105" > (**) XKB: model: "pc105" > (**) Option "XkbLayout" "fr" > (**) XKB: layout: "fr" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > Using vt 7 > (--) using VT number 7 > > (WW) Open APM failed (/dev/apm_bios) (No such file or directory) > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.2 > XFree86 Video Driver: 0.6 > XFree86 XInput driver : 0.4 > XFree86 Server Extension : 0.2 > XFree86 Font Renderer : 0.4 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,1237 card 0000,0000 rev 02 class 06,00,00 hdr 00 > (II) PCI: 00:04:0: chip 8086,7000 card 0000,0000 rev 01 class 06,01,00 hdr 80 > (II) PCI: 00:04:1: chip 8086,7010 card 0000,0000 rev 00 class 01,01,80 hdr 00 > (II) PCI: 00:06:0: chip 8086,1229 card 103c,10c3 rev 05 class 02,00,00 hdr 00 > (II) PCI: 00:0a:0: chip 9004,8078 card 9004,7880 rev 01 class 01,00,00 hdr 00 > (II) PCI: 00:0c:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00 > (II) PCI: 00:0d:0: chip 1013,00b8 card ffff,00ff rev 45 class 03,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) PCI-to-ISA bridge: > (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) > (--) PCI:*(0:13:0) Cirrus Logic GD 5446 rev 69, Mem @ 0xfc000000/25, 0xfecfd000/12 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B] > [1] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B] > [2] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B] > [3] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B] > [4] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B) > [5] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B) > [6] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B] > [7] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] > [8] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B] > [9] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B] > [1] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B] > [2] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B] > [3] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B] > [4] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B) > [5] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B) > [6] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B] > [7] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] > [8] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B] > [9] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B] > [6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B] > [7] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B] > [8] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B] > [9] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B) > [10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B) > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B] > [14] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] > [15] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B] > [16] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > II) Loading extension X-Resource > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.2 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Speedo > (II) LoadModule: "cirrus" > (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o > (II) Module cirrus: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.6 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.4 > (II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8, > CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD, > CL-GD5465, CL-GD7548 > (II) Primary Device is: PCI 00:0d:0 > (--) Assigning device section with no busID to primary device > (--) Chipset CLGD5446 found > (II) Loading sub module "cirrus_alpine" > (II) LoadModule: "cirrus_alpine" > (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o > (II) Module cirrus_alpine: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B] > [6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B] > [7] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B] > [8] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B] > [9] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B) > [10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B) > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B] > [14] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] > [15] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B] > [16] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B] > [6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B] > [7] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B] > [8] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B] > [9] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B) > [10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B) > [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [16] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B] > [17] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] > [18] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B] > [19] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] > [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) CIRRUS(0): initializing int10 > (II) CIRRUS(0): Primary V_BIOS segment is: 0xc000 > (**) CIRRUS(0): Depth 16, (--) framebuffer bpp 16 > (==) CIRRUS(0): RGB weight 565 > (==) CIRRUS(0): Default visual is TrueColor > (==) CIRRUS(0): Using SW cursor > (--) CIRRUS(0): Linear framebuffer at 0xFC000000 > (--) CIRRUS(0): Using MMIO > (--) CIRRUS(0): MMIO registers at 0xFECFD000 > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Loading /usr/X11R6/lib/modules/libi2c.a > (II) Module i2c: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.2.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) CIRRUS(0): I2C bus "I2C bus 1" initialized. > (II) CIRRUS(0): I2C bus "I2C bus 2" initialized. > (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0. > (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" removed. > (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0. > (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" removed. > (II) CIRRUS(0): Manufacturer: LNK Model: 1 Serial#: 436 > (II) CIRRUS(0): Year: 1996 Week: 47 > (II) CIRRUS(0): EDID Version: 2.1 > (II) CIRRUS(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V > (II) CIRRUS(0): Sync: Separate Composite > (II) CIRRUS(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23 > (II) CIRRUS(0): Gamma: 3.00 > (II) CIRRUS(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display > (II) CIRRUS(0): redX: 0.625 redY: 0.340 greenX: 0.285 greenY: 0.605 > (II) CIRRUS(0): blueX: 0.150 blueY: 0.065 whiteX: 0.281 whiteY: 0.311 > (II) CIRRUS(0): Supported VESA Video Modes: > (II) CIRRUS(0): 720x400@70Hz > (II) CIRRUS(0): 720x400@88Hz > (II) CIRRUS(0): 640x480@60Hz > (II) CIRRUS(0): 640x480@67Hz > (II) CIRRUS(0): 640x480@72Hz > (II) CIRRUS(0): 640x480@75Hz > (II) CIRRUS(0): 800x600@56Hz > (II) CIRRUS(0): 800x600@60Hz > (II) CIRRUS(0): 800x600@72Hz > (II) CIRRUS(0): 800x600@75Hz > (II) CIRRUS(0): 832x624@75Hz > (II) CIRRUS(0): 1024x768@87Hz (interlaced) > (II) CIRRUS(0): 1024x768@60Hz > (II) CIRRUS(0): 1024x768@70Hz > (II) CIRRUS(0): 1024x768@75Hz > (II) CIRRUS(0): Manufacturer's mask: 0 > (II) CIRRUS(0): Supported Future Video Modes: > (II) CIRRUS(0): #0: hsize: 640 vsize 480 refresh: 70 vid: 18993 > (II) CIRRUS(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 > > *** If unresolved symbols were reported above, they might not > *** be the reason for the server aborting. > > Fatal server error: > Caught signal 11. Server aborting > > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to org.[/ref] Sounds like a pretty freaky problem. Could it be that someone is trying to send X data to you over the second NIC card and your bombing because X has a problem handling data before its done initializing? What happens if you install the module for your second NIC but make sure the interface is down? Alternatively what happens if you ensure that your machines hostname resovles to 127.0.0.1 (to force local X data through the loopback interface)? HTH Neil -- Neil Horman Red Hat, Inc., http://people.redhat.com/nhorman gpg keyid: 1024D / 0x92A74FA1, http://www.keyserver.net [allowsmilie] => 1 [showsignature] => 0 [ipaddress] => [iconid] => 0 [visible] => 1 [attach] => 0 [infraction] => 0 [reportthreadid] => 0 [isusenetpost] => 1 [msgid] => [ref] => <20031218121854.617c179d.nosnos94@_hateSPAM_wanadoo.fr> [htmlstate] => on_nl2br [postusername] => Neil [ip] => nhorman@rNeOdSh [isdeleted] => 0 [usergroupid] => [membergroupids] => [displaygroupid] => [password] => [passworddate] => [email] => [styleid] => [parentemail] => [homepage] => [icq] => [aim] => [yahoo] => [msn] => [skype] => [showvbcode] => [showbirthday] => [usertitle] => [customtitle] => [joindate] => [daysprune] => [lastvisit] => [lastactivity] => [lastpost] => [lastpostid] => [posts] => [reputation] => [reputationlevelid] => [timezoneoffset] => [pmpopup] => [avatarid] => [avatarrevision] => [profilepicrevision] => [sigpicrevision] => [options] => [akvbghsfs_optionsfield] => [birthday] => [birthday_search] => [maxposts] => [startofweek] => [referrerid] => [languageid] => [emailstamp] => [threadedmode] => [autosubscribe] => [pmtotal] => [pmunread] => [salt] => [ipoints] => [infractions] => [warnings] => [infractiongroupids] => [infractiongroupid] => [adminoptions] => [profilevisits] => [friendcount] => [friendreqcount] => [vmunreadcount] => [vmmoderatedcount] => [socgroupinvitecount] => [socgroupreqcount] => [pcunreadcount] => [pcmoderatedcount] => [gmmoderatedcount] => [assetposthash] => [fbuserid] => [fbjoindate] => [fbname] => [logintype] => [fbaccesstoken] => [newrepcount] => [vbseo_likes_in] => [vbseo_likes_out] => [vbseo_likes_unread] => [temp] => [field1] => [field2] => [field3] => [field4] => [field5] => [subfolders] => [pmfolders] => [buddylist] => [ignorelist] => [signature] => [searchprefs] => [rank] => [icontitle] => [iconpath] => [avatarpath] => [hascustomavatar] => 0 [avatardateline] => [avwidth] => [avheight] => [edit_userid] => [edit_username] => [edit_dateline] => [edit_reason] => [hashistory] => [pagetext_html] => [hasimages] => [signatureparsed] => [sighasimages] => [sigpic] => [sigpicdateline] => [sigpicwidth] => [sigpicheight] => [postcount] => 6 [islastshown] => [isfirstshown] => [attachments] => [allattachments] => ) --> xfree86 failed , 2 networks cards - Linux Setup, Configuration & Administration

xfree86 failed , 2 networks cards - Linux Setup, Configuration & Administration

Removed by Administrator...

  1. Moderated Post

    Default Re: xfree86 failed , 2 networks cards

    Removed by Administrator
    Kadaitcha Guest
    Moderated Post

  2. #2

    Default Re: xfree86 failed , 2 networks cards

    In comp.os.linux.setup Nosnos <fr> wrote: 

    Signal 11 is usually associeated with faulty memory. It can be that
    inserting the new network card you moved or disloged one of the
    memory module. Check it. Or the new network card isn't really working
    properly.

    Davide
    Davide Guest

  3. #3

    Default xfree86 failed , 2 networks cards



    Hi, since i have installed a second network card, startx failed !

    It fails when eth1 is up, but works fine when the module of my second network card is unload.

    is someone has an idea ?

    here is the log :


    XFree86 Version 4.3.0
    Release Date: 27 February 2003
    X Protocol Version 11, Revision 0, Release 6.6
    Build Operating System: Linux 2.4.21-pfeifer-r1_pre4 i686 [ELF]
    Build Date: 11 September 2003
    Before reporting problems, check http://www.XFree86.Org/
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/XFree86.0.log", Time: Thu Dec 18 11:57:16 2003
    (==) Using config file: "/etc/X11/XF86Config"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "monitor"
    (**) | |-->Device "cirrus"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xfree86"
    (**) XKB: rules: "xfree86"
    (**) Option "XkbModel" "pc105"
    (**) XKB: model: "pc105"
    (**) Option "XkbLayout" "fr"
    (**) XKB: layout: "fr"
    (==) Keyboard: CustomKeycode disabled
    (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
    (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    Using vt 7
    (--) using VT number 7

    (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
    (II) Module ABI versions:
    XFree86 ANSI C Emulation: 0.2
    XFree86 Video Driver: 0.6
    XFree86 XInput driver : 0.4
    XFree86 Server Extension : 0.2
    XFree86 Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) PCI: Probing config type using method 1
    (II) PCI: Config type is 1
    (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,1237 card 0000,0000 rev 02 class 06,00,00 hdr 00
    (II) PCI: 00:04:0: chip 8086,7000 card 0000,0000 rev 01 class 06,01,00 hdr 80
    (II) PCI: 00:04:1: chip 8086,7010 card 0000,0000 rev 00 class 01,01,80 hdr 00
    (II) PCI: 00:06:0: chip 8086,1229 card 103c,10c3 rev 05 class 02,00,00 hdr 00
    (II) PCI: 00:0a:0: chip 9004,8078 card 9004,7880 rev 01 class 01,00,00 hdr 00
    (II) PCI: 00:0c:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00
    (II) PCI: 00:0d:0: chip 1013,00b8 card ffff,00ff rev 45 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(0:13:0) Cirrus Logic GD 5446 rev 69, Mem 0xfc000000/25, 0xfecfd000/12
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) Active PCI resource ranges:
    [0] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B]
    [1] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B]
    [2] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
    [3] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B]
    [4] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B)
    [5] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
    [6] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B]
    [7] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
    [8] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B]
    [9] -1 0 0x00000500 - 0x0000050f (0x10) IX[B]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B]
    [1] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B]
    [2] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
    [3] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B]
    [4] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B)
    [5] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
    [6] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B]
    [7] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
    [8] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B]
    [9] -1 0 0x00000500 - 0x0000050f (0x10) IX[B]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B]
    [6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B]
    [7] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
    [8] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B]
    [9] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B)
    [10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
    [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [13] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B]
    [14] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
    [15] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B]
    [16] -1 0 0x00000500 - 0x0000050f (0x10) IX[B]
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension FontCache
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
    (II) Module type1: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.2
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Type1
    (II) Loading font CID
    (II) LoadModule: "speedo"
    (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
    (II) Module speedo: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.1
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Speedo
    (II) LoadModule: "cirrus"
    (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
    (II) Module cirrus: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 Video Driver
    ABI class: XFree86 Video Driver, version 0.6
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 XInput Driver
    ABI class: XFree86 XInput driver, version 0.4
    (II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
    CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
    CL-GD5465, CL-GD7548
    (II) Primary Device is: PCI 00:0d:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset CLGD5446 found
    (II) Loading sub module "cirrus_alpine"
    (II) LoadModule: "cirrus_alpine"
    (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o
    (II) Module cirrus_alpine: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B]
    [6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B]
    [7] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
    [8] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B]
    [9] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B)
    [10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
    [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [13] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B]
    [14] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
    [15] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B]
    [16] -1 0 0x00000500 - 0x0000050f (0x10) IX[B]
    (II) resource ranges after probing:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xfecfec00 - 0xfecfec7f (0x80) MX[B]
    [6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B]
    [7] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
    [8] -1 0 0xfecfc000 - 0xfecfcfff (0x1000) MX[B]
    [9] -1 0 0xfecfd000 - 0xfecfdfff (0x1000) MX[B](B)
    [10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
    [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
    [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
    [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [16] -1 0 0x0000f880 - 0x0000f8ff (0x80) IX[B]
    [17] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
    [18] -1 0 0x0000f860 - 0x0000f87f (0x20) IX[B]
    [19] -1 0 0x00000500 - 0x0000050f (0x10) IX[B]
    [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
    [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/X11R6/lib/modules/libvgahw.a
    (II) Module vgahw: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
    (II) Module int10: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) CIRRUS(0): initializing int10
    (II) CIRRUS(0): Primary V_BIOS segment is: 0xc000
    (**) CIRRUS(0): Depth 16, (--) framebuffer bpp 16
    (==) CIRRUS(0): RGB weight 565
    (==) CIRRUS(0): Default visual is TrueColor
    (==) CIRRUS(0): Using SW cursor
    (--) CIRRUS(0): Linear framebuffer at 0xFC000000
    (--) CIRRUS(0): Using MMIO
    (--) CIRRUS(0): MMIO registers at 0xFECFD000
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Loading /usr/X11R6/lib/modules/libi2c.a
    (II) Module i2c: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.2.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/X11R6/lib/modules/libddc.a
    (II) Module ddc: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) CIRRUS(0): I2C bus "I2C bus 1" initialized.
    (II) CIRRUS(0): I2C bus "I2C bus 2" initialized.
    (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
    (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" removed.
    (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
    (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" removed.
    (II) CIRRUS(0): Manufacturer: LNK Model: 1 Serial#: 436
    (II) CIRRUS(0): Year: 1996 Week: 47
    (II) CIRRUS(0): EDID Version: 2.1
    (II) CIRRUS(0): og Display Input, Input Voltage Level: 0.700/0.300 V
    (II) CIRRUS(0): Sync: Separate Composite
    (II) CIRRUS(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
    (II) CIRRUS(0): Gamma: 3.00
    (II) CIRRUS(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    (II) CIRRUS(0): redX: 0.625 redY: 0.340 greenX: 0.285 greenY: 0.605
    (II) CIRRUS(0): blueX: 0.150 blueY: 0.065 whiteX: 0.281 whiteY: 0.311
    (II) CIRRUS(0): Supported VESA Video Modes:
    (II) CIRRUS(0): 720x40070Hz
    (II) CIRRUS(0): 720x40088Hz
    (II) CIRRUS(0): 640x48060Hz
    (II) CIRRUS(0): 640x48067Hz
    (II) CIRRUS(0): 640x48072Hz
    (II) CIRRUS(0): 640x48075Hz
    (II) CIRRUS(0): 800x60056Hz
    (II) CIRRUS(0): 800x60060Hz
    (II) CIRRUS(0): 800x60072Hz
    (II) CIRRUS(0): 800x60075Hz
    (II) CIRRUS(0): 832x62475Hz
    (II) CIRRUS(0): 1024x76887Hz (interlaced)
    (II) CIRRUS(0): 1024x76860Hz
    (II) CIRRUS(0): 1024x76870Hz
    (II) CIRRUS(0): 1024x76875Hz
    (II) CIRRUS(0): Manufacturer's mask: 0
    (II) CIRRUS(0): Supported Future Video Modes:
    (II) CIRRUS(0): #0: hsize: 640 vsize 480 refresh: 70 vid: 18993
    (II) CIRRUS(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513

    *** If unresolved symbols were reported above, they might not
    *** be the reason for the server aborting.

    Fatal server error:
    Caught signal 11. Server aborting


    When reporting a problem related to a server crash, please send
    the full server output, not just the last messages.
    This can be found in the log file "/var/log/XFree86.0.log".
    Please report problems to org.
    Nosnos Guest

  4. #4

    Default Re: xfree86 failed , 2 networks cards

    In comp.os.linux.setup Nosnos <fr> wrote: 

    Well, open the machine and look at the memory modules...
     

    Then it could be a conflicts in the module that manage eth1. Are both
    the cards the same kind or do they uses different drivers? What if you
    compile the drivers in the kernel instead of as modules?

    Davide
    Davide Guest

  5. #5

    Default Re: xfree86 failed , 2 networks cards

    On 18 Dec 2003 11:48:47 GMT
    Davide Bianchi <net> wrote:
     
    >
    > Signal 11 is usually associeated with faulty memory. It can be that
    > inserting the new network card you moved or disloged one of the[/ref]
    How should I do to check this ? 
    The network card is working fine.

    Moreover i can startx and then load the module and up eth1. But if I up (in rc) eth1 before launch X, so startx will fail 


    Nosnos Guest

  6. #6

    Default Re: xfree86 failed , 2 networks cards

    Nosnos wrote: 

    Sounds like a pretty freaky problem. Could it be that someone is trying
    to send X data to you over the second NIC card and your bombing because
    X has a problem handling data before its done initializing? What
    happens if you install the module for your second NIC but make sure the
    interface is down? Alternatively what happens if you ensure that your
    machines hostname resovles to 127.0.0.1 (to force local X data through
    the loopback interface)?

    HTH
    Neil

    --
    Neil Horman
    Red Hat, Inc., http://people.redhat.com/nhorman
    gpg keyid: 1024D / 0x92A74FA1, http://www.keyserver.net

    Neil Guest

  7. #7

    Default Re: xfree86 failed , 2 networks cards

    On Thu, 18 Dec 2003 12:18:54 +0000, Nosnos
    <fr> wrote:
     

    This isn't "2 nic" Pete, is it?

    chrisv Guest

  8. #8

    Default Re: xfree86 failed , 2 networks cards

    "Nosnos" <fr> wrote in message
    news:fr... 
    > >
    > > Signal 11 is usually associeated with faulty memory. It can be that
    > > inserting the new network card you moved or disloged one of the[/ref]
    > How should I do to check this ? 
    > The network card is working fine.
    >
    > Moreover i can startx and then load the module and up eth1. But if I up[/ref]
    (in rc) eth1 before launch X, so startx will fail 
    >[/ref]

    This sounds like an IRQ conflict between the video and the second NIC.

    JW


    Jacob Guest

  9. #9

    Default Re: xfree86 failed , 2 networks cards

    Nosnos wrote: 
    >>
    >>Signal 11 is usually associeated with faulty memory. It can be that
    >>inserting the new network card you moved or disloged one of the[/ref]
    >
    > How should I do to check this ?[/ref]

    http://www.memtest86.com/

     
    >
    > The network card is working fine.
    >
    > Moreover i can startx and then load the module and up eth1. But if I up (in rc) eth1 before launch X, so startx will fail

    >
    >
    >[/ref]


    --
    <J Q B>

    Jim Guest

Similar Threads

  1. Templates: Business Cards, Post Cards, etc. . . .
    By Worsley@adobeforums.com in forum Adobe Indesign Windows
    Replies: 6
    Last Post: May 25th, 01:28 AM
  2. Replies: 17
    Last Post: August 22nd, 05:00 PM
  3. Installing XFree86 v3.3.6 instead of v4.0
    By Andreas Janssen in forum Debian
    Replies: 0
    Last Post: July 27th, 11:10 PM
  4. XFree86 4.3
    By Joeri De Backer in forum Debian
    Replies: 5
    Last Post: July 2nd, 11:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139